new powermaster results

ed hess

race or get outta the way
while waiting for the new rear i gave the syclone new brakes.

y'all aint gonna like this but redid front and rear just like they were.

regular gm brand pads for the front. cuz they dont squeal

replaced double large shoes in the rear with the same.

changed flexible lines to russell SS lines

added a gauge to the front circuit (allready had one on rear)

changed out both line lock solenoids since they began to show signs of leakdown after 2 years abuse.

and the part none of ya will like....

installed a gran national style powermaster.

staging the truck was effortless.

after the run when i was back in the pits somebody asked me how the brakes were.

up until that point I hadnt even thought about the brakes.

at that point i realized just how good they worked compared to the oem vacuum setup .

monday when i pulled the heads i was able to leve the head studs in place and just lift the heads right off since nothing was in the way.

I couldnt ask for more.

ed
 

MikeRenz

not stock
you need to slip a digital camera purchase into that build sheet of your sy. :lol:

You can easily get a 'good enough for car pictures' one for $100.
 

ed hess

race or get outta the way
MikeRenz said:
you need to slip a digital camera purchase into that build sheet of your sy. :lol:

You can easily get a 'good enough for car pictures' one for $100.

do any of the cheap ones do 9 seconds worth of video? :D

ed
 

bigtime

Sy-Ty Builder
ed hess said:
MikeRenz said:
you need to slip a digital camera purchase into that build sheet of your sy. :lol:

You can easily get a 'good enough for car pictures' one for $100.

do any of the cheap ones do 9 seconds worth of video? :D

ed
My cannon for $275 does video. All of the vids in my gallery are from it. Now I got a bigger card so i can turn the resolution up. :tup:
 

fivetodrive

CRISPY
Re: new powermaster results

ed hess said:
and the part none of ya will like....

installed a gran national style powermaster.

staging the truck was effortless.

after the run when i was back in the pits somebody asked me how the brakes were.

up until that point I hadnt even thought about the brakes.

at that point i realized just how good they worked compared to the oem vacuum setup .

monday when i pulled the heads i was able to leve the head studs in place and just lift the heads right off since nothing was in the way.

I couldnt ask for more.

ed


Ed. Do you have any pictures of this setup? Also how is the powermaster setup working. I was looking up powermaster and it sounded like they had to change out the accumulator every couple of years. Is yours holding up ok? or have you changed it since then... Thanks!!!!
 

MikeRenz

not stock
Re: new powermaster results

this might be it:
P1010022.JPG
 

JSM

Active member
Re: new powermaster results

ed hess said:
do any of the cheap ones do 9 seconds worth of video? :D

ed

I thought your goal was to only need 8 seconds of video???

Don't tell us your slowing down now are you?

You could probably find one that you can interface the start button with your line lock release. :tup:
 

2kwik4u

Resident slow guy
Re: new powermaster results

JS Manufacturing said:
I thought your goal was to only need 8 seconds of video???

Don't tell us your slowing down now are you?

You could probably find one that you can interface the start button with your line lock release. :tup:

I vote Jeff gets "longest awaited comback in History" award at Nats this year.......30 months has to be some kind of record!!!
 

JSM

Active member
Re: new powermaster results

Sweet at least I can win something.

That is funny though, didn't even pay attention to date.
 
Top