New syclone owner

Jakazz75

New member
Bought a syclone from a forum member recently and just wanted to step in and say hello. I bought the truck from a guy named Robert in Florida. Truck has a built motor and unfortunately my heavy footitis broke the transmission before I could really enjoy the truck very much.. Not too worry I understand this game is expensive and Im coming out of a stroker motor blown 1000hp viper that I went through about 4 motors with so yes I'm a dummy and sink lots of money into my ride that I will never get back.
I'm currently running on E85 only tune and going to put bigger injectors, fuel pump and get the power up to the 600 range and see what she can do.
I have found lots of informative stuff on this site and I'm sure I will continue to keep finding stuff as this long never ending project goes on...
Are there any fast syclones here in the Dallas fortworth area?


Kris
 

TNPhoon

1of28
Re: New syclone owner

Welcome. Seems like you're already used to the abuse so you will fit in just fine with a Syclone. :tup:
 

Jakazz75

New member
Re: New syclone owner

Welcome. Seems like you're already used to the abuse so you will fit in just fine with a Syclone. :tup:

Yes pretty much any car I would have preferred would have been a money pit, I chose the Syclone because of how rare it is. I saw one when I was much younger running around at the street races, he lined up to run a buddy of mine who had a 95 rt10 viper on a 150shot (this was 1996 I believe) of spray at the time and he rarely rarely lost because he actually knew how to drive... That
Syclone was making around 450 hp or so he stated and it left so hard... The race was very very close at the finish line and I will never forget that moment.. I thought now that's a cool ass Truck!!!! Granted the viper was coming hard that little syclone just got out so far it made it a fair race..
So needless to say I can't wait to get it back and take it out hopefully for a few months and see if I can keep it together this time. Problem I have is running around with all these 1000rwhp cars down here... Ugh I have to try and convince these guys to go from a stop lol...
I'm doing lots of the little things mentioned to try and lighten this little fat boy up as well to try and give me a little extra advantage and make it a tad easier on that tranny...
 

jharrison

New member
Re: New syclone owner

Welcome, it's great to find another Sy owner in Texas! Hopefully you can make the meet coming up in a few months. We usually hit LRD on friday and saturday, then have Erik's famous bar-b-que on sunday at Lake Belton.
 

wildphil

I Love My Ty's
Re: New syclone owner

You found out how hard on transmissions these trucks are. You probably should install a 4l80e trans. Do a search on this site on the 4l80 and see if you are interested in going that route. Those poor 700r4 transmissions just won't handle all the torque and the AWD.
 

T-Bone

Active member
Re: New syclone owner

Those poor 700r4 transmissions just won't handle all the torque and the AWD.

If they are built right, they can. RPM's level VI 4L60E has not sustained a failure yet in a SyTy (knock on wood). I suspect for the price tag though, one could go with a 4L80E just as cheap :dunno:
 

Jakazz75

New member
Re: New syclone owner

You found out how hard on transmissions these trucks are. You probably should install a 4l80e trans. Do a search on this site on the 4l80 and see if you are interested in going that route. Those poor 700r4 transmissions just won't handle all the torque and the AWD.

Oh yes I've searched and searched.. Being I don't do any of the work myself and have to pay my local favorite tuner and after consulting with them and a few transmission shops I have found that it will cost me about 7k to get that 4l80 done right.. I'm terribly afraid I'm going to spend that money and then blow the motor the next month and the truck will be down for a year because I'm too broke to do anything else.. I was full steam ahead on the 4l80 build too... I will def end up regretting not doing it but right now I'm just getting the 700r4 built.. I'm also going to focus on lightening up the truck quite a bit so hopefully it will be easier on the turd.. RPM did tell me they would back the tranny up for 3months so if it does break hopefully I can get them to cover it for me per our conversation and I will just have to learn to how to pull that thing myself..
 

Jakazz75

New member
Re: New syclone owner

A built 4L80 will run me close to 3k quoted from 4 different quality builders then I have to purchase the transmission controler ($400-600)
All the parts and adapter crap to make it work from my research will be about 1k. The. The installation and so forth.. ..
Rpm quoted me $2300 for my level 5 700r4 then $500 for the in and out install..
 

0966Sy

Code what?
Welcome! As things are looking now I would say the 2014 Texas meet is going to be in April or may. I'm waiting for Kirk to post the 2014 schedule for LRD. Same pavilion, same lake.....this year fajitas. Sorry I need some sleep this year
 

Jakazz75

New member
Re: New syclone owner

Welcome! As things are looking now I would say the 2014 Texas meet is going to be in April or may. I'm waiting for Kirk to post the 2014 schedule for LRD. Same pavilion, same lake.....this year fajitas. Sorry I need some sleep this year

Sorry prob dumb question but what's LRD?
And i would be able to swing may for sure granted this truck is running lol...
 

0966Sy

Code what?
Little river dragway near temple. I personally haven't raced on it yet. It's an old historic track, 1/4 mile IHRA. Reason for choosing this track was they are the only ones open in a 3hr radius on Saturday evening for street racing. We have a two day event, track Saturday, BBQ at the lake Sunday. Check the southern forum for last two years meets/pics.

Don't feel bad, there are a lot of us here in TX without running SYTY's. If just those I know of would all show up to the meet it would be a 30 truck turnout easily. My plans are to keep it going every year and it will get bigger. First year Bruce's Sy went 10's on Little river dragway.

Good luck with your new truck and please check in with us planning the 2014 TX SYTY meet.
 

Jakazz75

New member
Re: New syclone owner

Little river dragway near temple. I personally haven't raced on it yet. It's an old historic track, 1/4 mile IHRA. Reason for choosing this track was they are the only ones open in a 3hr radius on Saturday evening for street racing. We have a two day event, track Saturday, BBQ at the lake Sunday. Check the southern forum for last two years meets/pics.

Don't feel bad, there are a lot of us here in TX without running SYTY's. If just those I know of would all show up to the meet it would be a 30 truck turnout easily. My plans are to keep it going every year and it will get bigger. First year Bruce's Sy went 10's on Little river dragway.

Good luck with your new truck and please check in with us planning the 2014 TX SYTY meet.

No problem at all.. Thanks
 

Bullydawg

Mo' Boost Mo' Problems!
Re: New syclone owner

In for updates! I feel this is going to be a pretty good thread! I enjoyed your story of a first Syclone experience...

I haven't had any personal experiences with one, but I love neat 80's/90's car. I had the money and picked one up when I was deployed... I can't wait to get back from overseas so I can enjoy it a bit before I bring it to England with me!
 

Jakazz75

New member
Re: New syclone owner

In for updates! I feel this is going to be a pretty good thread! I enjoyed your story of a first Syclone experience...

I haven't had any personal experiences with one, but I love neat 80's/90's car. I had the money and picked one up when I was deployed... I can't wait to get back from overseas so I can enjoy it a bit before I bring it to England with me!

These trucks/suv's are probably super cool over there!!! Talk about rare!!
Yeah I'm not scared to really push the limits ( unfortunately for my pocket)..
I'm going to see what I can get this thing to do most likely break push it till it breaks then build it from there. I have a few options down the road as I have a heads cam Ls3 sitting in my garage so that could be the next motor.. But let's see whAt I can do with this setup.. Ya just never know.. Ill practice at Lower boost levels and work on my 1/8th mile then start turning it up as I go.. Have to get the 60ft dialed in as that's the most important piece to the puzzle IMHO..
It will be down till late jan early feb.. Ill def keep everyone updated as I go down this road.. Thanks
 

Bullydawg

Mo' Boost Mo' Problems!
Re: New syclone owner

I would sure think so! I have never seen one in the states, and have known about them for a while... I bet nobody in England will even know what it is. I can't see it drawing too much attention.
 
Top