New Turbo Sound

doomdead

New member
My ty has about 90,000 miles now. And just a few days ago i started hearing my turbo actually winding up. sorta sounds like a police siren as i spool boost up. is this a sign that its failing? if so when? also how much for a rebuild or cheap replacement.... not looking for any $$ upgrades right now just a reliable truck. I had a friend with a murcur once and we could always hear his turbo winding up but i never found out the reason for it...

any ideas??? thanks
 

bdubb

I am teh kingpin!
take off the orange hose, and check out the compressor wheel. see if you have any bent fins.
 

Tydriver

TurboLS6 Powa'
After ya do what BW says, take a look at the surrounding parts near that area.. I have a local friend here that had same thing happen, turns out he had a peice of the plastic OVER RAD tube for the filter assy break loose and get sucked into turbo.. Caused minor damage on turbo but enough to make similiar noise as you describe.
 

doomdead

New member
what exactly do i need to do? can i get to what your talking about by just taking off the intake hose? i've never torn into the turbo before......and just fyi its spooling up just fine, and at idle theres no noise. a friend of mine said his parents volvo had the same sound and it went about 20k miles later.... ill try and take a look at it but i have to leave tomorrow morning and dont think i can get to it right away.... im wondering though, how would i get 'anything' in there? theres no leaks in the intake where i can get dirt or crap in there...... but im all ears..
thanks
 

ParTyBoy

New member
doomdead said:
what exactly do i need to do? can i get to what your talking about by just taking off the intake hose? i've never torn into the turbo before......and just fyi its spooling up just fine, and at idle theres no noise. a friend of mine said his parents volvo had the same sound and it went about 20k miles later.... ill try and take a look at it but i have to leave tomorrow morning and dont think i can get to it right away.... im wondering though, how would i get 'anything' in there? theres no leaks in the intake where i can get dirt or crap in there...... but im all ears..
thanks

Don't need to get into the turbo to look... what you do is unbolt the airbox.
proceed to loosen the clamp on the end of the airtube ( above the radiator) that connects to the orange elbow hose.. Then loosen the clamp connecting the orange elbow hose to the turbo... Remove the two clamps and the hose... now take a mechanics mirror and inspect the front inlet of the turbo for chips, bent blades...
 

doomdead

New member
k got the hose off, and the first thing in noticed was the inside of the orange hose and around the mouth of the cross over tube, theres some sort of dark oil. i dont know if it IS oil but there is some sort of sludge there.... and i got looking inside the turbo and yes a couple of the fins on the turbine are slightly bent, AND one of the fens is chipped pretty bad... enough where i could stick my finger in there and start to get around the edge of the blade.....

how much trouble am i in??? how much money.... and can i still drive it?
 

doomdead

New member
k, im certain that its oil thats had leaked out back into the intake, and im assuming that means its going into my engine... hopefully someone can prove me wrong... but i wanted to say also, that i was looking at the orange hose closely and theres a black rubber ring on the inside.... well mines got chunks missing out of it. i pulled off the IC not too long ago for a top end clean and didn't notice any amount of oil on the IC or intake it self...... lemme know whats up ... would really appreciate it. i really need to know how much im in over my head and if i can still drive it....
 

Wayne

New member
I sell turbos here @ work (Turbochargers.com) the price for a new
TDO6 17C 8cm is $699.00.
Have you felt the compressor wheel yet to see just how much shaft play
you have ?
If you need anything give me a call up here @ work. (Houston)
713.681.1111
There are several upgrades available for that app. to , & not just the
TDO6 20Gs 8cm & 14cm.
I'm not out to be supersalesman ...... just trying to be helpfull
Or if you would like to go the rebuild route , no problem.
Wade
 

Tydriver

TurboLS6 Powa'
Oil is more than likely from the PCV system and is 110% normal.. (Unless yer PCV valves arent working ;) ) Anyhow. As far as the bent/broken fins.. Yes you can drive it, I wouldnt for long however because with the imbalance in the compressor wheel coupled with the RPMs they turn it wont be long before you have a N/A Typhoon and where are those parts that fall off going to go ???

Yeah, thats it.. Into the intercooler.

I would just get a stocker turbo off someone else for $100-200 or get an upgrade to a 20g if ya want it.....


Best wishes
 

TheObiJuan

Active member
chitownsyty.com has:
For Sale
Please contact us for pricing/pictures & negotiating.
Stock Syty parts

Stock turbo (2) with actuators


this is probably not updated, but worth a shot.

and if you are going to go new, the STY 54 is a damn good turbo. :D
 

bdubb

I am teh kingpin!
talk to John Waller, he has a guy that can get it rebuilt for a couple of hundred bux. even with a 20g wheel and what not.
 

doomdead

New member
LDZ5150 said:
The oil your seeing is probably from your pcv valves. I thought the same thing when I took my intake tube off. There are also some pictures of the compressor blades of my turbo.

http://www.syty.net/phpBB2/viewtopic.php?t=16509&highlight=

yea thats what the crap looks like, so it should be the pcv valves... i think what chewed up the blades a bit was that black rubber ring inside the orange tube... well theres some chunks missing out of it now... should i pull it and see how bad the guts are or what, im like 3 weeks from moving into a new house and am on a VERY low budget right now.... what do you guys think, do i have another 10k miles left on it before it goes? a couple days .... where do i stand on that... i wouldn't mind rebuilding it and getting the bigger wheel but i can't do it anytime soon..... bw, how do i get ahold of john?
 

doomdead

New member
I dont have his contact, can someone post his email address? and what will the 20g provide vs stock? and the other questions from my previous post.
 
S

static

Guest
the whisteling sound is more than likely not from the bent fins themselves, altho that isn't helping things, if is whisteling like a police siren really loudly under boost, it is more than likely the actual seals on the turbo "blowing by" i've had this happen on more than one of my turbo cars, owned almost every brand of turbo car that i could afford.

You best bet in this situation is to upgrade. Yes you can spend the money to replace it with a stock replacement, but while you have it out, if you have the money that is, why simply not upgrade to at least a 20g.

just my $.02

static
 
Top