Newer design Emulator

Tydriver

TurboLS6 Powa'
Thought some peeps maybe interested in the EMULATION SETUP.

I bought mine from LDTI and it appears to work so far, but I see there is another unit for sale MUCH CHEAPER than I paid and it says it works for our chipset

27C128 (right ?)

Anyhow.. Heres the link.. Good luck ! :fadein:
http://xtronics.com/memory/romutator.htm
 

leroy

Donating Member
Transtronics are right down the street from me. I need to go visit them. It looks good especially if you like Windows software. The interface with Tunercat will be great!

Jim
 

smeagol

Active member
WOOHOOO

Tunercat interface....awesome.. that will make the whole package....

Next we'll have to convince Bill to make Promgrammer work with it.. ;)


now we'll just have to work on some self correcting wideband code.... then some fuzzy logic / neural net boost control... and we're golden.
 

BillC

New member
Hmmm, looks very interesting. A Promgrammer interface would be sweet, when I get some time I'll look into it (anyone want to donate one of these to the effort? :) ). Anyone have any idea what the Tunercat interface looks/works like? Will Tunercat talk directly to the emulator, or does the emulator software simply look for changes to a bin file? If it's the second thing (looking for file changes), then you might not need a Promgrammer-specific interface, since the Tunercat interface might work.

The biggest problem I see is that the emulator uses a serial port. For people with only one serial port in their laptop (like me), this could preclude doing near-real-time changes -- you'd probably have to stop Datamaster, switch cables, write the changes out, switch cables back and restart Datamaster. You might be able to get away with using an A/B switch box, but you'd still have to stop/restart the software. You could also use two computers, but that's pretty impractical. Anyone have any better suggestions?

Of course, if you have to go to all that effort to reprogram the emulator, then it wouldn't be much more to just write a whole new bin out each time and you wouldn't need a direct interface from Promgrammer....
 

smeagol

Active member
I thought some guys were using Belkin USB to serial adapters...

i'll have to look into it, but I realized the same thing after looking at the pics.
 
Top