Quickstop [UK]
Combating adversyty.
OK,
went for a drive tonight with a friend to try and sort out some problems.
Reset the ECM by pulling the fuses and all looks good. The we drove off and straight away code 13 O2 fail came on.
We drove around for a bit and randomly it would go closed / open loop on the O2 gauge.
I think it was a wiring fault with my LM 1 as we did a second run and there were no error codes whatsoever.
The problems as I see it is that the second time we were out (20 min) the ECM was in closed loop with the O2 the whole time. WOT / idle / braking / accelerating. What gives?
Incidentally, if it were in closed loop the whole time, trying to pull back the mixture for highway driving, would that cause it to lean out?
The other problem related to this is that I think that it may be causing the mixture to lean at around 100mph and I get a misfire or something. I have a DM file that I would appreciate someone looking over? PM me with your e-mail if you have the time.
Thanks guys.
went for a drive tonight with a friend to try and sort out some problems.
Reset the ECM by pulling the fuses and all looks good. The we drove off and straight away code 13 O2 fail came on.
We drove around for a bit and randomly it would go closed / open loop on the O2 gauge.
I think it was a wiring fault with my LM 1 as we did a second run and there were no error codes whatsoever.
The problems as I see it is that the second time we were out (20 min) the ECM was in closed loop with the O2 the whole time. WOT / idle / braking / accelerating. What gives?
Incidentally, if it were in closed loop the whole time, trying to pull back the mixture for highway driving, would that cause it to lean out?
The other problem related to this is that I think that it may be causing the mixture to lean at around 100mph and I get a misfire or something. I have a DM file that I would appreciate someone looking over? PM me with your e-mail if you have the time.
Thanks guys.