o2 sensor need or dont need

11secty

New member
i know you usually need one but.... i have a custom chip from phil long and ive run the truck with it in the down pipe and without it in the dp and dont really notice any difference its not dumping fuel in like when a normal vehicle has a bad one any ideas guys
 

Jimmy

Banned
Re: o2 sensor need or dont need

11secty said:
i know you usually need one but.... i have a custom chip from phil long and ive run the truck with it in the down pipe and without it in the dp and dont really notice any difference its not dumping fuel in like when a normal vehicle has a bad one any ideas guys
That is an open loop chip so no you don't need an O2 but your ECM will throw a code 13 every now and then without one. No worry.

OPEN LOOP - this is the mode your ECM is in until the coolant temperature and a couple other sensors get to operating values. This is also true when you are at WOT or when throwing codes/ CEL's

CLOSED LOOP - the ECM uses information primarily from the Oxygen Sensor and adjusts fuel delivery and timing to achieve minimum emmisions, better gas mileage and power.

The narrow band sensors we have stock are really archaic,and you can't really trust their broad interpretations,The only way to truly know your AFR's is to use a WB O2
 
Last edited:

Xtrempickup

All turbo All the time
Re: o2 sensor need or dont need

i would say yes, or maybe you could run a wide band o2, still need an o2 of some sort
 

11secty

New member
Re: o2 sensor need or dont need

Jimmy said:
That is an open loop chip so no you don't need an O2 but your ECM will throw a code 13 every now and then without one. No worry.



The narrow band sensors we have stock are really archaic,and you can't really trust their broad interpretations,The only way to truly know your AFR's is to use a WB O2


thnks jimmy i do have the innivative wide band and its running good 14.5 around town and11.2 under 18 lbs of boost with a huge turbo
 
Top