Oct-tune

IGottaSy

Active member
Re: Oct-tune

Anybody have a boost chart with degree timing for 10 psi, 13 psi, 16psi, 18psi, 20psi for example to share with the rest of us interested in learning how to tune?

Please specify octane values and/or if alcohol injection or race fuel used.

So, a good AFR to start with is 11.5-12 when tuning for most power is the general consensus.
 

dgoodhue

BuSTeD 4.3
Re: Oct-tune

AFR of 11.5 to 12:1 is for gasoline. It changes with alky, e85

As for tuning, I go by the philosophy of give the 'engine what it wants not what you think it needs'

I think the general tuning path is to add boost first and then add timing. The amount of timing depends I the engine build, intake temps, fuel and tolerances. I have seen some people run as high 26 degrees. I have started out at 14 degrees and slowly added timing from there.
 

IGottaSy

Active member
Re: Oct-tune

Stock everything including chip...
16° by 3600 rpm 15 psi of boost maxed out.
21° by 4800 rpm which is near redline still 15 psi boost.
Stock electronics allow -14° to +14° correction?
 
Last edited:
Top