OEM harness plug

OK, I have 2 questions.
After searching varrious online parts stores I am unsure where to get an OEM wiring harness plug for me SY. Jegs has some that are close (Deutsche Connectors) but I don't kow for sure if they will work. The one I need is the TURBO BOOST SOLENOID plug that has been cut off of my harness. I need more power:rant: :cool:

Second question,
If I find one that will work... which wire goes to which terminal?
I may have to take a pic and post it to be sure I get it right but I think there is a white one and an orange one. The solenoid I believe would be oriented to have a front pin and a rear pin. The other option wold be top and bottom.

I can take a pic later tonight after work and post if it helps with the description.
Thanks guys
 

Don W.

Stab it and steer it
Re: OEM harness plug

The orange wire is the "top" wire.

From a previous post:

I finally found what I needed. The 2 wire Beldon Weather Pack terminal for the IC pump is part number 784522. (This may or may not be the correct # for the WG sol.)This is the single pack number for hanging on the carousel's you see on the parts floor. There is a different number for bulk. Trouble is it's bare so you need the terminals that the wire attaches to and the tiny seal that goes in on back side. Those numbers should be 725151 & 725152
 
Re: OEM harness plug

kreepinty said:
why not just get one from the gm dealer?
Last time I went to the local GMC dealer it took 20 min. just to find a Syclone listed in the computer. Granted the plugs are probably the same on all of the harnesses but I just hate to even walk into a dealership. As a last resort I would have but I'm not in a huge hurry to max my boost yet. I'm still enjoying the little it makes without the solenoid.

Anyway, thanks Don for the info. I should have it all hooked up later this week.
 
Re: OEM harness plug

Well, the plug mentioned above was different However...
Looking around in otherplaces on the truck I did find the same plug on what appears to be the ABS wire to the front PS wheel.

I broke down and went to the dealer... NO CLUE on either connector.
Checked various auto parts stores... nothing
The ones I got from Jegs are different and won't work either.

Finally I just cut the one off the ABS and spliced it on for the boost solenoid.
 

Loeryder

New member
Re: OEM harness plug

SonomaGTlover said:
Well, the plug mentioned above was different However...
Looking around in otherplaces on the truck I did find the same plug on what appears to be the ABS wire to the front PS wheel.

I broke down and went to the dealer... NO CLUE on either connector.
Checked various auto parts stores... nothing
The ones I got from Jegs are different and won't work either.

Finally I just cut the one off the ABS and spliced it on for the boost solenoid.

I was gonna offer that since I am removing my ABS, but it sounds like you got it solved. :tup:

Any news on the next round of Rad/Fan supports?
 

dgoodhue

BuSTeD 4.3
Re: OEM harness plug

SonomaGTlover said:
I broke down and went to the dealer... NO CLUE on either connector.

If you look at the electrical wiring section of the service manual, GM put the part number on each electrical connector. The connection will be bare of wires and termals (just the plastic), but usually you find those.
 
Re: OEM harness plug

Yours is sitting here ready to install. I'm just waiting for a time when we can get together since I have your hat to. Pick a Sunday and I'll come visit you this time.
Loeryder said:
I was gonna offer that since I am removing my ABS, but it sounds like you got it solved. :tup:

Any news on the next round of Rad/Fan supports?
 
Top