OEM O2 sensor

Damian

Member
What brand is the factory O2 sensor? I think my Bosch one is causing some of my issues, which a Bosch one caused problems on one of my old cars before. Or what are you guys using as the stock narrow band replacement?

Thanks in advance.
 

Slyclone

Well-known member
Re: OEM O2 sensor

Funny as I was sifting through some paper work I discovered a invoice which never made it to my syclone folder (which is sadly as thick as a phone book) but I just put it away. And re-dug it out for you. I had suspect issues with 02 so I replaced.

I used part BOSCH 13077 oxygen sensor

I think NGK makes them as well if you want to go that route.
 

Don W.

Stab it and steer it
Re: OEM O2 sensor

I've heard that we should stick with Bosch. That NGKs fail early. Just what I've heard. Take it or leave it.
 

Damian

Member
Re: OEM O2 sensor

My Bosch maybe has 2-3k miles on it, so it cant be bad. I know in my Jeep, those guys say the Bosch does weird things reading wise, and they say to use NTK, not NGK. The NTK works good in there. So it looks like Im on to further trouble shooting for my issue. Thanks guys!
 

Slyclone

Well-known member
Re: OEM O2 sensor

Fuel system going bad? Weak pump trying to compensate? Blown out fuel diaphragm in regulator, stuck or bad injectors.

Just trying to think what would foul one out, or cause problems

What led you to believe it was bad some more info would help

I fouled one because my truck has a bad tune.
 

Don W.

Stab it and steer it
Re: OEM O2 sensor

If you have Data Master you watch the o2 output. IIRC You can also see the "cross counts" which is the number of times th o2 goes from high to low. Maybe someone can chime in with what the number is supposed to be. If you Google "how to diagnose o2 sensors" you'll get a ton of info.

HTH
 

Mario65

Hotrodicus Supersonicus
Re: OEM O2 sensor

I recently put in a BOSCH 13077. Its always worked great for me. They do get crappy after a couple of years. A fresh one is always good. I bought it at NAPA 42.00.
 

Damian

Member
Re: OEM O2 sensor

The engine just goes really lean on descell and sometimes dies on me. It will die on me when I go from park to reverse or drive.
 

atkonkler

Is this your bush?
Re: OEM O2 sensor

Damian do you have a wideband? If so what kind? Mine dies on reverse sometimes also... Never really thought anything of it though just started it back up and rolled out.
 

Don W.

Stab it and steer it
Re: OEM O2 sensor

I'd guess it's not the o2. Search for resetting the IAC, Idle Air Control. See if that helps. You'll need a data logger but if anyone has fooled with the throttle plate stop screw (IE the seal is gone.) then that should probably be adjusted as well.

Yur kinda stuck without a data logger of some kind.

HTH
 

Damian

Member
Re: OEM O2 sensor

I have the AEM wideband.

Ive datalogged with Tunerpro. Its weird, when I disconnect my MAP sensor, the idle becomes perfectly smooth. The O2 sensor readings aren't all over the place, they actually hold steady. The idle acualy sounds like a normal engine running. Its the 3 Bar map sensor I got from Hood and Hood flashed my ECU for it.

The one thing Ive done to help combat the engine shutting off is raise the idle with the idle screw. It still shuts off fro time to time but it helps.
 
Top