Oil filter relocator lines - braided?

SYO237

SyTy Registry
Since removing my ABS, the stock in/out lines to the oil filter relocator are an eyesore to what should be nice open real estate (I dont use fenderwells).

Id like to replace the in/out lines with some braided line/AN fittings so I can route them more cleanly.

Does anyone know the size of line and AN fittings I need to purchase for both the relocator and engine block?
Pics available from anyone who has done this?

TIA
 

jwaller

Evil Genius/SyTy Guru
Re: Oil filter relocator lines - braided?

pics are on my site under jamie hacking rebuild. -8 for the lines.
 

Black Knight

I Glow Therefore I am
Re: Oil filter relocator lines - braided?

Anyone ever attempted to relocate the filter back under the truck to make filter changing a little less of a mess. Just throwing an idea out there if it would even be conceivable to mount it on the frame say back by the tranny??
 

SYO237

SyTy Registry
Re: Oil filter relocator lines - braided?

Mess? Use a 2 liter bottle cut in half to slide around the filter while you unscrew it to catch the oil and let the filter drop.... take a clean rag, catch the drips, put new filter on. No messes.

One of these days, I'll do a tech writeup with pics.....
 

Black Knight

I Glow Therefore I am
Re: Oil filter relocator lines - braided?

Sweet idea on the 2 liter, I must have missed that tip somewhere along the way. I think part of me just doesn't want to see it there anymore though.
 

ghettosled

SYTY SUPERSTORE
Re: Oil filter relocator lines - braided?

just drill and tap the remote filter housing and the piece that bolts to the bottom of the block with 3/8" npt fittings.,. Then you can run whatever an size you wish.. 8an is .500" ID
 
Top