Oil pressure sending unit....

Gbodydriver

Gbodydriver

Member
Ok I've searched and had no luck finding a picture showing a oil pressure sender attached too the remote filter housing. I assume this will not work with a stock airbox... Anybody have a pic or some input.. What size fittings to get etc...

Im using a autometer electric setup that comes with 1/8" NPT electric sender and 1/4 NPT adapter fittings.

Any pics or what fittings I need would help a lot

Thanks
 
S

Syclone22

Member
Re: Oil pressure sending unit....

Hi There i installed my Autometer oil sender
unit on the driver side block above the
remote oil filter adapter i do have pics the
fitting you need is a tee with 1/8 npt female or if you have
a 4 an line the tee has to be 4 an so you can install
the sender in between for pressure signal .
 
Gbodydriver

Gbodydriver

Member
Re: Oil pressure sending unit....

Syclone22 said:
Hi There i installed my Autometer oil sender
unit on the driver side block above the
remote oil filter adapter i do have pics the
fitting you need is a tee with 1/8 npt female or if you have
a 4 an line the tee has to be 4 an so you can install
the sender in between for pressure signal .
Click to expand...

Can you please post a couple of pics...

I can pm You my email if You cant post them directly...

Thanks
 
You must log in or register to reply here.
Top