Ok I need some info.

Deception

Deception

Òó
Well I joined the jack stand club to day to check into some leaks. Well as I was looking here is some stuff that I found.

IMG_0476.jpg

Were does this go and theirs no line their?

IMG_0482.jpg

This is on my tranny lines (going to my front cooler I think) seems wrong to me.

IMG_0480.jpg

shouldnt this be covered?

IMG_0479.jpg

My Ty

IMG_0483.jpg

my new display for car shows

IMG_0478.jpg

This is what the damn rabbit did. Is this stock or after market?
 
C

Captain Morgan

Moderated User
Re: Ok I need some info.

I believe the missing vac line might actually be a vent, not 100% sure though

EDIT: do you have your EGR valve still? I think that missing line goes to the EGR or is part of that system, so if its been deleted, that explains the missing line.

Not sure what Im looking at on your trans line picture, but if that rubber line IS your trans line now, then it looks like someone kinked it, cut out the bad part and replaced it with rubber and some clamps.

You are missing the inspection cover for the trans

No, that is not a stock IC heat exchanger
 
Deception

Deception

Òó
Re: Ok I need some info.

Captain Morgan said:
I believe the missing vac line might actually be a vent, not 100% sure though

EDIT: do you have your EGR valve still? I think that missing line goes to the EGR or is part of that system, so if its been deleted, that explains the missing line.

No clue lol were should it be lol

Not sure what Im looking at on your trans line picture, but if that rubber line IS your trans line now, then it looks like someone kinked it, cut out the bad part and replaced it with rubber and some clamps.

The hose looked wrong to me can i get a new line to get rid of it? It leaks.

You are missing the inspection cover for the trans

Sweet lol hmm that sucks

No, that is not a stock IC heat exchanger
Click to expand...

Great so know were I can get another one?

and thanks for the help
 
J

Josh Young

kirk
Re: Ok I need some info.

I'd bet that one of your leaks is the turbo oil return line, mine made the same mess all over the oil pan. It is the line that comes from the bottom of the turbo, and goes into the oil pan. These lines leak where the metal part turns to rubber at the bottom of the line. You can fix this with a new piece of hose and clamps or order a new brided line from RPM, a nice piece.
 
C

Captain Morgan

Moderated User
Re: Ok I need some info.

Deception said:
No clue lol were should it be lol
Click to expand...
The EGR valve is the odd looking round thing that should be directly behind the throttle body, shown in the picture below. If its not there, its most likely replace with a block off plate.

intake.jpg


The hose looked wrong to me can i get a new line to get rid of it? It leaks.
Click to expand...
yes, if the hose is part of your current transmission lines running to or from the trans, then it is indeed wrong. Your options are to either try the dealership and see if they have transmission lines for a 4x4 Blazer/Jimmy or try someplace like LMC Truck. The other option you have is to make braided stainless steel lines with AN fittings, there is a nice writeup in The Vault section of this site.

Sweet lol hmm that sucks
Click to expand...
no big deal, it should be easy to obtain one.


Great so know were I can get another one?

and thanks for the help
Click to expand...

Not sure where to get a new one, I know someone was doing a group buy on some replacement ones not too long ago, but Im not sure if any vendors still sell them or not. The other option is just to go with an Air/Air setup.
 
C

Captain Morgan

Moderated User
Re: Ok I need some info.

ty166 said:
i always take off the converter covers , heat kills transmissions , i figure with it off the converter gets alittle more to help cool it off.
Click to expand...

yeah lots of people think that, unfortunately it doesn't really do anything. Id rather have the protection from rocks and road debris from getting up in there.
 
You must log in or register to reply here.
Top