Ok, need some help with possible winter mods

2500avalanche

Well-known member
So, my truck is running great. I would consider it basically stock. Here are the mods:
Ultimate chip (for stock injectors)
ATR Cat BAck
Not sure if it has a Walbro Fuel pump.

My Ty is clean. I enjoy it, but like everyone, I would like to get a little more power from it.
I will have about 2,000 to spend on it over the winter for some upgrades.

I enjoy that I can get into it and go, but would like to know what everyone thinks about possible upgrades to get some more power and boost from it (correctly)

I would like a larger turbo and 3" DP to match exhaust, but I am not sure if I will need a new convertor or injectors...

Any hints would be great.

I enjoy the dependability (yes... I am not crazy) of this truck, and seems to be very stable and nice on the Highway and driving.
 

Static

Member
Re: Ok, need some help with possible winter mods

Heads. L35s seem to be the best bang for the buck. Direct bolt on unlike vortecs that require intake to be modded. Flow much more than stock heads. Im seeing rebuilt 181 casting heads with screw in studs for $300 for the pair shipped on ebay. Im going to be doing this over the winter. You probably want to upgrade your injectors and possibly add an alky kit too.
 

TeeTopZ

Member
Re: Ok, need some help with possible winter mods

Get a walbro pump and a hotwire kit. Not sure won't cut it with a bigger turbo and supporting mods
 

ajt86

Member
Re: Ok, need some help with possible winter mods

the second you go bigger turbo its going to blow your budget- depending on how big your looking fuel pump, injectors, tune, stall converter

I usualy go with supporting stuff first. get the fuel system squared away. like teetopz said- fuel pump and hot wire kit. one of the things at the top of the list should be a wide band too. 2000$ doesn't stretch as far as it used to haha
 

dgoodhue

BuSTeD 4.3
Re: Ok, need some help with possible winter mods

If you want to make your Typhoon faster, I would get a scan tool and wbo2; make sure it reads 100% as is with basically no spark retard and good intake temps. After that install an alky kit and tune for he alky (you will need to pull some fuel) and add boost. You can either buy a turbotweak chip or buy a ostrich and tune your truck. The easiest way to tune your truck yourself would be to tune it using your existing code 58 bin and modify the F77x boost multiplier table.

The above might cost $1000. If you want to spend more, you could always do a 20g or 3" downpipe. Sometime just getting the trucks to run perfect is a big enough project in itself.
 

Black Knight

I Glow Therefore I am
Re: Ok, need some help with possible winter mods

If you want to make your Typhoon faster, I would get a scan tool and wbo2; make sure it reads 100% as is with basically no spark retard and good intake temps. After that install an alky kit and tune for he alky (you will need to pull some fuel) and add boost. You can either buy a turbotweak chip or buy a ostrich and tune your truck. The easiest way to tune your truck yourself would be to tune it using your existing code 58 bin and modify the F77x boost multiplier table.

The above might cost $1000. If you want to spend more, you could always do a 20g or 3" downpipe. Sometime just getting the trucks to run perfect is a big enough project in itself.

Do everything Dave said, because realistically you're going to need to all this anyway if you start changing out heads, cam, turbo, yada yada. Yes, the factory turbo and heads aren't ideal, but as many have shown you can make them work to net you another 50hp with a good tune and more boost, which sounds like all you're after anyway.
 
Top