OVER BOOSTING PROBLEM...

TurboJunk

questionable
I have just convertd my 92 jimmy with a 93 TY motor. I have removed the cat and put a borla cat-back. I noticed when i was installin the motor that the waste gate flap was SEIZED in the closed position. Is this common? and is it worth puttin an external waste gate or should i just replace the internal one? also the boost control solinoid is bad i was just going to buy a manuel boost controller is this the right approach?
 

smeagol

Active member
If you have no cat, and a borla exhaust, you'll have boost spiking problems most likely. That's not even considering if your wastegate is stuck. FYI, they are hard to move from the closed position, that is where they do remain, held tightly closed by spring pressure.

If it was me, i'd put an external wastegate on the crossover and be done with it, use a regulator to control the boost on that.

my :2cents:
 

TurboJunk

questionable
its not that its spiking its just goin until th computer limiter comes in. Ths no spiking its just a steady climb until the limiter.

Thats what i was thinking... gt rid of the whol interal gate and solinoid thanks
 
Top