Overboost II

Andreas

Andreas

New member
Had a overboost problem a couple months ago. Put in some new silicone hoses and it fixed the problem. Also lubed up the actuator with high temp lube. Now it´s back...hit 1,3 bar today!!!!!!!!
All hoses in place and looks like new.

Someone got ideas?
Solenoid problem? (but if thats dead it only gets up to 8psi, right?)
Turbo problem?
No change in the exhaust sytem...got all mufflers...

/Andreas
 
bezerk

bezerk

New member
What chip are you using?
what wastegate/turbo?
still have the cat back on??

the stock turbo/wastegate will give you spikes up to 3 psi, why? cause it sucks
 
bezerk

bezerk

New member
maybe you should adjust the wastegate rod alittle bit.
i think the wastegate solenoid is normally open, so if it are bad wirdes, you should only be able to make base boost..??
 
Andreas

Andreas

New member
Thats was I was thinking to about the solenoid...

I adjusted the rod according to the 7/8 instructions...

Really anoying when everything looks right and something is terrible wrong :evil:

Anyways....going for vacation so the TY is gone rest for a while :(
 
You must log in or register to reply here.
Top