PCV oily residue solution - inline filters?

mrweelr

New member
Putting all this cool new stuff on my truck and hate to think of those PCV tubes coating the inside of my new turbo, intercooler, and intakes with oily gunk like they did before. On my old Talon Tsi, I just cut the PCV line and put a large fuel filter inline; it would fill up with oil within a few weeks, granted that motor was tired. Has anyone done this with their SyTy? I don't want to just use breathers as I'm in California and need to keep it SMOG legal. The emissions guy probably won't like the filters anyway, but I can just take them out at test time. Comments/suggestions?
 

2kwik4u

Resident slow guy
Re: PCV oily residue solution - inline filters?

I know the SVT contour guys have a problem with the PCV valves leaking too much oil into the upper, and lower intake manifolds, and gumming up the secondary runners.......Thier solution is to put an oil seperator INLINE with the PCV system. They say it works wonderfully.....lemme get some links.

Possibly something like this: Steeda Oil Seperator

Heres the setup the Lightning guys use

And a thread on corvette forum about a cambeel hausfield filter of some sort

If your really hard up for money, or bored

Hope that helps some.
 

mrweelr

New member
Re: PCV oily residue solution - inline filters?

Yeah, a catch-can, separator, anything to keep that oil from getting sucked back into the intake. Thanks for the links, I will probably go with something like that before I start the truck back up with the new goodies!
 
Top