PCV setup and Vortecs

N

NOWAY55

New member
Can someone set me straight on the use of a PCV system with Vortecs?

I am wondering if having the PCV setup to factory specs is causing an issue. Do I just need breathers or what is recommended? What are the possible problemw with having the factory PCV's on?
 
4C FED

4C FED

Absolutum Dominium
Re: PCV setup and Vortecs

The common problem is oil in the intake tract where the PCV's feed into.
 
N

NOWAY55

New member
Re: PCV setup and Vortecs

So, what do you recommend? Should I just put a breather on both covers and be done with it blocking off all other vacuum hoses?

I do have a lot of oil being sucked into the intake. My A-A IC is dripping with oil.

Also getting a lot of part light throttle KR and very little at WOT.

I am thinking it's the PCV system screwing me up.
 
MRKING

MRKING

New Parts for Old Trucks
Re: PCV setup and Vortecs

You may have another issue if that much oil is being spit out . Either your pcv setup takes the oil or it all drips out of the breathers onto your motor, its up to you .

Do you have a wide band 02 hooked up to see why your getting the low rpm kr ?
 
You must log in or register to reply here.
Top