Pinion Alignment Shims

[Paulo Carvalho]

Hi
Help needed
My 93 Typhoon is stock
Going to buy JTR 2" lowering blocks and the set back plates
The truck has already a pinion alignment shimm with 0.7" in the higher side.
JTR says I will need the 2º shimm.

Shall I use both shims or a shimm with 2º plus 0.7" ???

Thank you

https://www.dropbox.com/s/72u3g62gocsb4lj/IMG_20181125_153117.jpg?dl=0

https://www.dropbox.com/s/9h5dvpgag67q4wp/IMG_20181125_153143.jpg?dl=0

https://www.dropbox.com/s/69lfoajbqy3wh9p/IMG_20181125_153155.jpg?dl=0

https://www.dropbox.com/s/traat59vm1nvvsz/IMG_20181125_153208.jpg?dl=0

https://www.dropbox.com/s/0rpua7j8m5ybwp1/IMG_20181125_153247.jpg?dl=0

https://www.dropbox.com/s/c7wp1jse1qde3ui/IMG_20181125_154043.jpg?dl=0

 

[RealFastV6]

I would suggest you keep the stock pinion angle wedge. It's probably going to be damn close. If after you've mocked it up you measure it and it's not right, you'll know what you need.

The info on the JTR site doesn't really apply apples to apples for our trucks. Their idea of a 2" drop is a 2" drop from a stock S10 spring, which we don't have.