Plug Wires

Ozrein

Ozrein

BC Syclone
OK, I've tried searching and havent come up with the answer I need... So maybe some one might be kind enough to help me out.

Simple question:

When getting new set of plug wires, do I need to say it's specifically for a Syclone or will a set for a standard 4.3 work? (high-performance wires of course, I'm more concerned about lengths, etc.)

From what I can gather, Taylors seem to have the best results or at least the most dependability.

Thanks alot.
 
Ozrein

Ozrein

BC Syclone
Thanks for the contact but I think I'll just get them locally if I can.

I want to get them on this week, I'm trying to track done a problem and the wires would be the last part I havent done yet in a typical tune-up. The end of the month is coming up pretty quick and I'll be putting a few miles on it from July 28 to Aug. 7 and I'd like it running good before that. If it's not, I sure hope some of the Edmonton guys won't mind helping me track done this WOT stuttering/rough idle problem.

I just need to know if the lengths/boot configurations for the Sy 4.3 are going to be different from a standard 4.3.
 
Jimmy

Jimmy

Banned
Yes the plug wires are Sy/Ty specific.I think that the only real difference is the #6 wire though.
 
AlaskaTy

AlaskaTy

New member
There are (4) 90* boots, (1) 180* boot, and (1) 135* boot. At least to make it simple those are the various boots you'll want.
 
Ozrein

Ozrein

BC Syclone
Thanks for the info guys, the hunt is on.

If I cant find anything around here, I may just have to talk to that guy GMTurbo posted. Does he ship all over the States? (i'm about 5 min. north of the Washington/B.C. border, so it usually works to ship things to WA)
 
sytyguy

sytyguy

Moderated User
I'm the guy Dave was speaking of......Yes I do ship internationally, and the wire set runs $35.99. They aren't SyTy specific, but a lot of manufacturers will call them SyTy wire sets and add in extra length to the wires for "heat-avoidance-routing". MSD, Accel, Moroso, and Taylor do this to my knowledge. The Taylors are one of the best sets you can get for the money, no doubt about it.

BTW, I stock the wires, but only in Black (give a few days if you want a red set).

Hood
 
Ozrein

Ozrein

BC Syclone
Hey thanks Micheal.

I'm going to try a place around here first. CamsTy from Alberta posted that he's using the MSD's and got them from Mopac of which there is one about 30min from where I'm at. So I think I'll try that route first just out of convenience. But that is a dam good price on the wires, so I'll definatly keep you in mind.

Thanks again.
 
You must log in or register to reply here.
Top