Project ty just painted

liquidswords88

I pity da fool
Hey all, just thought I would share a few pics of my ty. We just did some more reassembly last night. I think it turned out pretty good. Myself and my painter would recommend the high solid nason clear, it lays super smooth. The painter said that you could get away with only one coat of clear, but the ty got two,lol. The color candy white is exactly what I was looking for. It almost has a mother of pearl look to it, even though it is not a tri coat.









 

Jimmy

Banned
Re: Project ty just painted

Hey all, just thought I would share a few pics of my ty. We just did some more reassembly last night. I think it turned out pretty good. Myself and my painter would recommend the high solid nason clear, it lays super smooth. The painter said that you could get away with only one coat of clear, but the ty got two,lol. The color candy white is exactly what I was looking for. It almost has a mother of pearl look to it, even though it is not a tri coat.









These are the pics after you put the cladding back on,right?
 

liquidswords88

I pity da fool
Re: Project ty just painted

When we finally get some sun up here I will get it out and get some more pics. I have a set of saw blade corvette wheels that are painted super gloss black. I also have a set of red reflective typhoon decals to install. I think it is going to look pretty good. I am going for a stock type look with a little flare. I am real happy with how it all went back together. I was told to stay away from aftermarket fenders, so I spent a lot of time and even more money tracking down a pair of original gm fenders. It was not easy to find a set that were free of rust, dents and what not. But when it came time to put it all together, everything lined up real easy and straight.
 

liquidswords88

I pity da fool
Re: Project ty just painted

Not sure of the question? The body was painted with all the cladding removed. Then the cladding was painted separate. I had no idea how many pieces made up the cladding on these trucks until you get it all removed and spread out. It was quite a challenge getting it all set up to spray. But to my surprise it is fairly easy to install.
 

liquidswords88

I pity da fool
Re: Project ty just painted




I have to put this back in for like the 5th time. I also have to put all the interior back in. Fortunately the interior was the best part of the truck, like near mint.
 

liquidswords88

I pity da fool
Re: Project ty just painted



I had a plate made to bolt to the lower intake. It has made the engine a breeze to handle off of the picker. It also has allowed me to put the majority of the engine together before it gets placed in the chassis.
 

liquidswords88

I pity da fool
Re: Project ty just painted

Yes all the glass except the side rear windows were removed. All the weatherstripping has been replaced with lmc replacements. I've been happy with the fit of everything so far, but I have yet to fit the door glass run units. The fit of those will be a good test of the lmc quality. I restored an irocz a few years ago and sourced all the weatherstripping from 1a auto, it fit like crap. Hopefully it all works out well.
 

liquidswords88

I pity da fool
Re: Project ty just painted

The front cab mounts as well as the rocker panels were replaced. It looked very odd to me as the cab as a whole was in very good condition. The rust was isolated to the front can mount rocker panel area. Even 2 inches away it had zero rust. Looking at other 1st gen s10 type trucks this seems to be a common area for rust. The drivers side was worse than the passenger side as well. I chalk this up to a design flaw. My ty has spent it's whole life in Michigan per the car fax report. The previous owner told me it was never driven in the winter, which I believe from looking at the underbody. It did however spend the majority of its life sitting outside. This is where I feel the design flaw shows itself. The way the water is directed by the weather stripping, sends it right to the front cab mounts and the rockers. Once it gets there if the vehicle is not driven and moved the water sits there and rots from the inside out. It does not help that in between the floor panel and the front cab mounts there is a extra layer of steel there from the factory to reinforce that area. All the layers just hold more water. The backside of the new rockers were left open so that the water could drain out and not just build up. This trucks days of sitting outside are over though. I have no doubt that it is trapped water that rots out the front portion of these trucks. I also noticed that in the cowl drain area where it tapers down by the lower fender area, that the seam sealer from the factory is poorly placed and there are many areas that are missing seam sealer. These non sealed areas of the cab leak water directly into the cab mount and rocker panel. This was tested by pouring water in the cowl area and watching it drip into the area of the cab mount and rocker, leaking from the seams. So long story short if you want to keep your syty from rotting away keep it covered up.
 

SEL777

One of 101
Re: Project ty just painted

Yea, mines a retired DD. I had to drive through 3 Chicago winters, sad. But never broke down, and has been getting love and upgrades each and every year. Looks good for a 161K truck, but there's a little rust here and there. I have everything I need (included factory GM fenders,doors and tailgate ). I'm a little scared of whats beneath the cladding though. Nice work, and look forward to seeing out in the sun too
 

liquidswords88

I pity da fool
Re: Project ty just painted

Sorry I never saw the previous post. I am in the Sault Ste. Marie area. North of the mackinac bridge. I did a little more work on the ty. I got the window channel runs and the glass put back in. I started putting the wiring back in. I am getting rid of everything that this truck does not need to run. I mean everything. I even pulled the parking brake cables, and even the damn peddle out from under the dash. I bought a manual brake kit and non low drag calipers. No wipers or motor. The pile of stuff I removed from this truck was quite impressive. I am moving the battery to the rear in a sealed battery box. So under the hood all there will be is the engine, really just the engine.
 

Anarchy99

New member
Re: Project ty just painted

I'm looking to do a similar thing with the white paint and red Typhoon logos on my typhoon. Where did you order the red decals from.
 

liquidswords88

I pity da fool
Re: Project ty just painted

I got the from a place called graphik concepts. They are based here in Michigan. I found about them from a really old thread from this forum. I looked them up on google and called them. Come to find out,they supply a lot of others who are reselling the decals. The ones you see in the pics are reflective. The decal set was not cheap at 150.00, but the quality and service was top notch. I called them and two days later I had the set. Again the quality of these decals is super good.
 
Top