Prom PAQ

DaKine

New member
I have a black box in the glove box called Prom PAQ 2 .. would anyone know exactly what the features are.. i did a search with no avail.

The previous owner is also unsure what it really does, there is a key'd switch with 4 settings. I think it has something to do with fuel and timing??? ill probably google it to see if anything comes up.
 

DaKine

New member
Re: Prom PAQ

nevermind searched with Prom PAQ found nothing but searched with PromPAQ (one word) found some info .. i geuss ill be looking for a chip.
 

JSM

Active member
Re: Prom PAQ

Yea, it is a real old device that proved trouble some and way over complicated.

Multi select chips is much cleaner way.
 

DaKine

New member
Re: Prom PAQ

JS Manufacturing said:
Yea, it is a real old device that proved trouble some and way over complicated.

Multi select chips is much cleaner way.

This thing is wayyy in there (glove box) there is a rubber piece in the back of the box that goes wayy behind the dash.

Whats the easyist way to get it out/bypass it?

Is it simply plugged inbetween the main brain and the harness like a piggyback computer.

Thanks
 

DaKine

New member
Re: Prom PAQ

DaKine said:
Recently i had some problems in the begining i thought it was the trans .. but now i have pretty much narrowed it down to a clogged cat. I hooked up a Boost gauge and found a small vac leak, took care of that. What im getting now is Boost builds fine Half/part throttle up to 9-11lbs then it seems like it hits a wall and backs down to about 8lbs then back up to 10/11 then back down. I cant go Wot with out it doing this. Almost seems like its being held back. Exhaust pulses out the pipe feels pretty weak.. i really hope thas the problem. Im gonna get rid of the cat asap and hopefully its back to normal. Will also change the plugs and fuel filter.


I took out the cat today .. damn still got the same problem. Cant go WoT without stumbling. boost is still in the 8 - 10lb range. pissing me off :rant:

Do you think the prompaq is causing my boost/stumble problems?
 

JSM

Active member
Re: Prom PAQ

Prompaq's can cause all kinds of issues.

You should be able to remove the plug from your stock computer and just install the chip directly.

Do you have a scan tool? What is the scantool telling you the engine is doing? If you don't we most likely will be very little help. Laptop, scan tool should be 1st new tool for truck.
 

Flyin Ryan

hated cuz he drives fords
Re: Prom PAQ

Old school

prompaq.jpg


prompaq1.jpg
 

DaKine

New member
Re: Prom PAQ

Ah ha! i figured that rubber piece was the connection to the brain. Im going take that thing out tonight.. I was pullin and pulling.. hahaha good thing i didnt break anything.
Thanks a bunch for the pictures.

ill also run the scan tool tonight.

Boostedpimp said:
Old school

prompaq.jpg


prompaq1.jpg
 
Top