PSI @ Launch

SeattleSy#1255

Category 5 Conservative
I hear many of you beinga able to lauch with 10+ psi boost...I can only get 6 maybe, closer to 5...I'v got datamaster and throttle will be at 100%....is this normal for a stock turbo? Should I be able to get more boost at launch? If so, what is possible problem/fix?

thanks
 

jwaller

Evil Genius/SyTy Guru
most ppl leaving with more boost either have a larger turbo or a better torque converter. but with more boost you will only spin tires if you dont have more tire and better suspension
 

InvisiBill

Active member
One line tucked away in the owner's manual says that boost is cut if you floor the gas with the brake pressed... No idea how true that really is, but it says it...
 

sy1765

New member
not everyone uses the stock ecm to control boost, instead an electronic controller or a bleeder valve can be used.
with the ecm controlling boost i could get 6-7 lbs at most.
i have since used a few different methods and like the two valve setup that i'm currently using best. it allows me to set a launch pressure and a max pressure, but more importantly i can launch at a lower rpm with more boost. launching at lower rpms reduces your chances at spinning the tires. i can launch at any boost level, but find that 10 lbs works best for me.
 

sy2185

New member
I have a stock converter and a stock turbo(and chip)and can launch up to 14 psi, but it's all over ther place with wheelspin. I've found my best launches are around 9 psi, but I don't need to go wot to get there- I just roll to the line, build brake pressure and go about %50 throttle and floor it as soon as lights green-actually on the 3rd yellow.
Jeremy
 

Syclone2163

New member
I was only able to launch at 5-6lbs when i first got my truck. But once i fixed my 10lbs max boost issue i was able to launch at 10lbs every time, and my truck is completely stock. Maybe it just depends on how in tune the truck is.
 

SeattleSy#1255

Category 5 Conservative
I would agree with jwaller as i don't think i need any more boost in the first place...Never the less, what i was fist saying is obviously true and i'm wondering how and why??? Why is it, that some can launch with 10+ and others can't using stock turbo, TC, Chip, etc.? Is it a tuning issue and if so what factors are involved in this...I'm happy with 6psi @ launch, buy wonderin why this is the case as proven by some of the the replys? Any ideas?
 

doomdead

New member
before i left air in my lines i was able to get a good grip on my brakes, and with an external hks boost controller i was able to build up about 13 lbs of boost, anymore and i just started smoking... which for all the peeps standing around watching an allwheel drive suv peel out was pretty good. but now that im in the process of getting the brakes back to normal i can only hold about 10lbs before i start creeping foward.... it was with a run against seattlesy that we noticed i could build up a lot higher boost than his max at 6.... got us both curious.... i think, jeff, that if you could pull 10 w/o slipping around you'd be happier than that 6.... truck will be just 'a little' faster and i know you'll like that :smile:
 
Top