PTE turbo kit...

[Divergent Lightning]

Will the PTE turbo kit's internal wastegate be able to be hooked up to be controlled by the ECU or will a boost controller need to be installed to get it to work?

Any one have any pictures of the stock wastegate so I can compare to the PTE wastegate?

 

[Maxtor]

The spring in the PTE setup is stiffer than the stock spring. You will have to use a manual controller or do some chip work - the chip should work with some tweaking but I'm not sure how well.

Some people just run base boost and shorten the WG rod a little bit with the PTE - you should be able to get around 17psi without using any controller.

If you want to run higher boost, the valve from "boostvalve.com" seems to work pretty well.