pvc for cold air intake?

Flyin Ryan

hated cuz he drives fords
I have two questions... First one is simply when creating your own CAI, do you have to incorparate the PVC hose setup like the stock elephents trunk thing does?
Which brings me to my second question.. I only ask because I've basically found a filter that'll fit right to the turbo so I can get rid of the turbo killing factory setup and keep it simple til I relocate my battery.
If I do need the PVC setup which im sure I do.. can I just tap the filter's rubber for it? By this question I mean is it safe to have the PVC hookup inches from the turbo's cold side?

Thanks
 

QUICK STORM

B.A.M.F. BMW Tech
Re: pvc for cold air intake?

i think you mean PCV. if your not worried about emissions, than just put a breather on the pcv hose. but if you are worried about emissions then i would put the pcv hose and plumb it into the intake pipe as it is a recirculating system. hope this helps!
 

syclonekid43

New member
Re: pvc for cold air intake?

i mad a CAI and left that hose open. i know alot of people have done the same.its been like that for years. i would not know about emmisions cause im one of the lucky few who dont need to go.
 

Flyin Ryan

hated cuz he drives fords
Re: pvc for cold air intake?

Thanks fellas.. Jersey has one of the hardest emissions testing.. but I don't go thru them :) so it'll stay out of the intake track for now.
 

VermontTy

Support Our Troops
Re: pvc for cold air intake?

syclonekid43 said:
i mad a CAI and left that hose open. i know alot of people have done the same.its been like that for years. i would not know about emmisions cause im one of the lucky few who dont need to go.
You do get a little oil mist coming through the tube if you leave it open; I just put a 3/4" breather in the valve cover; standard SBC chrome dress-up style part.

The KB kit I had came with a little breather that you'd plug into, then clamp the hose coming from the drivers side valve cover.
 
Top