question for the tire pros

turbotyphoon69

New member
i have the HORIBLE eagle F1 runflats on my ty and the ride is bad :oops: , the tires are 275-40-zr18 and i was wondering what one size smaller would be on the side wall, and how much shorter are 245/40/18 on the side wall?

Does any one know of a good tire for a decent price that has good sidewall height for 18x8s. :D

... basically im looking for a good tire that doesnt look too low profile.
 

GM TURBO

Sell Out
I'll give the smart ass answer before anyone beats me to it...You shouldn't have gone with 18's.

You'll want to get as close to the original tire diameter as possible - which I believe is 25.7" - give or take. Most tire sites will have a calculator of sorts to figure this out.

The if you stay with the same aspect ratio (the middle number in the 274/40/18 - the smaller the first number gets the less sidewall you're going to have. The 40 is a percentage of the tire width. A 275/40 will be taller than a 245/40. A 245/45 isn't going to be much taller than what you have now.

Check out http://www.net-comber.com/tirecalc.html and plug in all the numbers you want.
 

GM TURBO

Sell Out
I had a couple other thoughts after posting this.

Runflats are going to have a more firm sidewall than a standard tire. Any change from these is going to help.

Also, you can play with tire pressure - the more tire pressure the harder its going to be. Lowering it will soften up the sidewall - but take away some of the benefits of an 18.

Everyone had their opinion as far as tires are concerned. A drag radial is going to have a softer sidewall - which is great for straightline performance - but isn't all that great for curves. I don't even know if anyone makes a 18" DR.

I've had good luck with BFG's. They were on the Ty when I originally got it. I've had them on a couple other cars with good results. I have Kumhos now. They have a pretty hard tread compound - they wear really well - but grip isn't the best. :fist: Goodyear.
 
Top