Question on moving the knock sensor..

MotorMouth

MotorMouth

Member
I have heard from quite a few people lately that moving the knock sensor as far away from the tranny is a good idea. Of the few local trucks that I have seen both have them moved to the front of the intake in the foreward coolant port that is not being used.

I was wondering if the mounting hole just to the left of the water neck would be a decent spot to mount it? I got rid of the passanger side accessory bracket so this hole is not being used for anything.

My%20Typhoon%20006.jpg


I figure it will be a good spot but wanted to get some oppinions before I hack into the sensor wiring.

Brian
 
G

Guest

Guest
I had mine there, and hardly EVER seen any knock... not even at 25.5 psi!!!! I have since moved it back to the stock location and i've got major knock issues... :evil:
 
SpoolingTurbo6

SpoolingTurbo6

Donating Member
ds

ds

When you move it there, is there any loss of signal due to the extra wire
needed to move it to the front?Turn the A/C on see if you get any knock
 
You must log in or register to reply here.
Top