Wikid 1
200+ lbs of puppy!
Hello everyone, I'm not exactly a SyTy owner, but i've always loved the trucks! i'd hate to actualy drive one everyday and wouldn't take it in the rain or snow especialy. my idea is i've come across a wrecked bravada for really cheap, now, i want to pick up a 2 door, 4wd 98 or so blazer, and put the AWD system in it, and turbo charge a build 4.3 under the hood (don't worry i won't put sy/ty badges on it
) anyways, this will be a daily driver, and i'll be selling my 01 WS6 to build this, I'd like to be in the low 11's maybe even high 10's but realize this thing will be pig heavy.
I'll be porting the heads (whichever i use i'll have vortec's from the bravada) and using forged rods/pistions and drilling the blocks to oil cool them.
I've read that the balance shaft blocks are not as strong as the non balance shaft blocks, would the stock block from a 98 be suitable to use, seing as it already has the crank position sensor and literaly belongs in the truck W/ no major modifications?
second, would the vortec heads from this 93 bravada be a better choice over whatever comes on a 98?
Third, intakes? i read alot about the 2114 intake, what is the average cost to convert it to MPI, and what are some other options? i'll have the stock MPI from the 98, the CPI from the 93 (CPI lower with custom upper?), or fabing a sheet metal wouldn't be that big of a deal either.
Finaly, cranks. all i've been able to find are stock, and 2k plus billit cranks. what is the stock one good to? i've seen guys here and else where going 10's on the stock bottom end. odd fire, even fire, benifit of either, or stick with what comes with the block to due to computer issues.
I'm sure i'll have more questions too but this is all i could really think of at the moment, i'll probably be running the PTE 53 turbo, 63 lb/hr injectors and the 422 cam W/ roller bearings. if anyone can give me any advice or point me in the right direction it'd be greatly appreciated,
thanks in advance
Nick
I'll be porting the heads (whichever i use i'll have vortec's from the bravada) and using forged rods/pistions and drilling the blocks to oil cool them.
I've read that the balance shaft blocks are not as strong as the non balance shaft blocks, would the stock block from a 98 be suitable to use, seing as it already has the crank position sensor and literaly belongs in the truck W/ no major modifications?
second, would the vortec heads from this 93 bravada be a better choice over whatever comes on a 98?
Third, intakes? i read alot about the 2114 intake, what is the average cost to convert it to MPI, and what are some other options? i'll have the stock MPI from the 98, the CPI from the 93 (CPI lower with custom upper?), or fabing a sheet metal wouldn't be that big of a deal either.
Finaly, cranks. all i've been able to find are stock, and 2k plus billit cranks. what is the stock one good to? i've seen guys here and else where going 10's on the stock bottom end. odd fire, even fire, benifit of either, or stick with what comes with the block to due to computer issues.
I'm sure i'll have more questions too but this is all i could really think of at the moment, i'll probably be running the PTE 53 turbo, 63 lb/hr injectors and the 422 cam W/ roller bearings. if anyone can give me any advice or point me in the right direction it'd be greatly appreciated,
thanks in advance
Nick