remote oil filter gauge connection

ChiPhoon

Chicago Typhoon!
Im looking for an elbow connector to feed off the remote oil housing to connect my oil gauge so i don't have to remove my stock airbox.
i already connected it a different way and cut down the tubing, so i don't have the length to reach the turbo oil feed, so i'm trying to find 90 degree / elbow to use off the remote oil connection, atleast till i can order new longer tubing.
was hoping someone knows of one from any of the vendors etc..
i appreciate the help.

003-3.jpg
 

TNPhoon

1of28
Re: remote oil filter gauge connection

Not sure of any vendors, but I have a 90 degree on mine. I found it at Industrial Rubber & Gasket in Nashville.

I *may* have picked up an extra one while I was down there. I will check and see in my bucket 'o parts tonight if I happened to grab a second.
 

ChiPhoon

Chicago Typhoon!
Re: remote oil filter gauge connection

Not sure of any vendors, but I have a 90 degree on mine. I found it at Industrial Rubber & Gasket in Nashville.

I *may* have picked up an extra one while I was down there. I will check and see in my bucket 'o parts tonight if I happened to grab a second.


hey thanks i appreciate you taking the time to look, if you dont find and have a link on their site ( if they have one ) i appreciate that ofcourse as well.
 

TNPhoon

1of28
Re: remote oil filter gauge connection

Yeah, this is their website: http://www.ir-g.com/ but they don't have much of anything listed on it. I had to go down there and go back with them to find it.

I tried looking back to see if I had the measurements for that somewhere but I don't. Maybe someone can chime in with that? I obviously can't take mine off to see lol.

If need be, I could grab one for you if we can remember/figure out what the size is, and ship it to you. Although, you may wanna see if you have any plumbing supply companies around there. IIRC, it was like $3 or something around there. Wasn't expensive at all, was just a bitch trying to track one down.
 

ChiPhoon

Chicago Typhoon!
Re: remote oil filter gauge connection

Yeah, this is their website: http://www.ir-g.com/ but they don't have much of anything listed on it. I had to go down there and go back with them to find it.

I tried looking back to see if I had the measurements for that somewhere but I don't. Maybe someone can chime in with that? I obviously can't take mine off to see lol.

If need be, I could grab one for you if we can remember/figure out what the size is, and ship it to you. Although, you may wanna see if you have any plumbing supply companies around there. IIRC, it was like $3 or something around there. Wasn't expensive at all, was just a bitch trying to track one down.

hey i appreciate the help, i am gonna try and check out some plumbing places. i had no luck at home depot/lowes unless i want 2 many pieces.
 

Damian

Member
Re: remote oil filter gauge connection

Tie it into the oil feed line to the turbo. Much easier and cleaner IMO. Works great in mine.
 

ChiPhoon

Chicago Typhoon!
Re: remote oil filter gauge connection

Tie it into the oil feed line to the turbo. Much easier and cleaner IMO. Works great in mine.

ye after i get newer longer tubing i will, but right now it will only fit the remote oil housing.
 

Damian

Member
Re: remote oil filter gauge connection

Looking at your signature, you're using the Autometer oil pressure gauge which is the same one I'm using. It's super easy to adapt it's original parts to work right at the block where the oil feed line is. I can get you a parts list that I used if you'd like. I'd have to go jack up the truck and look, nothing difficult though.
 

ChiPhoon

Chicago Typhoon!
Re: remote oil filter gauge connection

Looking at your signature, you're using the Autometer oil pressure gauge which is the same one I'm using. It's super easy to adapt it's original parts to work right at the block where the oil feed line is. I can get you a parts list that I used if you'd like. I'd have to go jack up the truck and look, nothing difficult though.

ye just looking for the cleanest install, i don't want you to have to go through the trouble. i think if i just find an elbow off the remote housing i would be fine, even if i ditch the OEM tube and airbox i wouldn't like the line coming straight out of the remote oil, also i wonder if pressure reads faster off the turbo line?
 

Damian

Member
Re: remote oil filter gauge connection

I don't know about quicker. I used a short nipple, and a T fitting. If I remember correctly it was all 1/4" pipe thread. The nipple is 3" long, maybe 4". It has to be longer so you can tighten everything down properly.
 
Top