Removing IC lines

[Fighting5thSVT]

Which direction ( toward driver side or pass side) of removing the lower stock lower IC line (the one that runs underneath the upper intake? I know that it takes some patience, but I just want to make sure that I am wiggling it the right way. I would like to get it out without taking the alternator and anything else off if possible.

Thanks in advance:tup:

 

[sycam_steve]

Re: Removing IC lines

Easiest way is to cut the metal pipes. You aren't going to reuse those rusty things again are you?

 

[Fighting5thSVT]

Re: Removing IC lines

Easiest way is to cut the metal pipes. You aren't going to reuse those rusty things again are you?

No, I don't plan on using them. However I would like to keep them with all of the other stock parts, just in case someone down the road needs them for a restore or something.

 

[Chest Rockwell]

Re: Removing IC lines

Have you seen this page yet? Lots of good info on that site.:tup:

 

[Fighting5thSVT]

Re: Removing IC lines

Have you seen this page yet? Lots of good info on that site.:tup:

Yes I did...I just must have read over the "slide out to the left" part:roll:

I was just coming back to post that I managed to get it out in one piece. Thanks anyway for the help to the guys that replied:tup: