Replacement engine missing nodular main caps

Drew-py

Drew-py

New member
Are there any other stock applications to get the nodular main caps from or is after market my only/best option now. My Syclone #2811 had its motor changed out a couple of times prior to me getting it and I know the engine that came apart on me was a 9.5:1 motor so my stock caps are long gone.
 
Beavis

Beavis

Still plays with trucks
Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

Yes, Program sells the best ones.
 
Drew-py

Drew-py

New member
Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

I am not familiar with Program could you advise me of their site or link it. Thanks
 
Drew-py

Drew-py

New member
Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

Thanks guys for the fast responses and link
 
cheatham2492

cheatham2492

New member
Re: Conformation that I don’t have nodular main caps.

Re: Conformation that I don’t have nodular main caps.

jwaller said:
I've not noticed ny problems with intechanceabliity but the agin I don't assemle y short blocks I leav that o the pros. I do that the syty's were supposed to have the HD cranks and by HD I mean they were supposed to have the solid ends cast on the rod journals. does it make a differance? I doubt it. it's gun drilling and if your going to break a stock crank I doubt that will stop it from happening.
Click to expand...

I bought my truck with one of your early motors in it John and Im still beating the shit out of it 10 years later.
Keep the pros on it. Good work.
Cheatie
 
nallj92

nallj92

Active member
Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

Re: UPDATE 1/17/06 Confirmation that I don’t have nodular main caps.

I used a set of eagle SBC 4 bolt main caps on mine, had them splay and drill the block for them. IIRC they were about 100 bucks for the set. We cut down the extra cap to 2 bolt and used that for the front main cap. added ARP main studs and then took to machining.
 
You must log in or register to reply here.
Top