0966Sy
Code what?
I purchased a kit from mike shortly after he started offering them. It was awsome through the winter here but now that the summer has come my IAT's are getting in the 110-130f on a 85f night after some mild driving for 20min w/o EGR. It climbs from 90f after a cold start. I have a PTE-52 kit with 50#'s and RPM's A2A with powdercoated mild steel pipes. I was expecting a closer to ambient air charge this summer. The intake charge pipe crossing over the turbo/downpipe is getting some bad heatsoak, im going to wrap it with an 11"- 18" aluminized blanket from turbonetics soon and see what changes that makes. Could someone with the aluminum pipes give some results with their IAT's.
As far as AFR(WB) and monitoring EGT can differ in IAT's. And i have neither of these sensor's. My base FP is 43-44psi with the 50#'s and im getting 880-930mv at Wot on 15psi.(T1F4) Datamaster is flaging it 1=rich. When i had it on Conley's Dyno w/ wideband sensor it was 14.7 in this tune.
Thanks for any input
As far as AFR(WB) and monitoring EGT can differ in IAT's. And i have neither of these sensor's. My base FP is 43-44psi with the 50#'s and im getting 880-930mv at Wot on 15psi.(T1F4) Datamaster is flaging it 1=rich. When i had it on Conley's Dyno w/ wideband sensor it was 14.7 in this tune.
Thanks for any input