S-terms at idle

spooldup

Super Member
On dm my s-terms were 177 at idle. From what i heard they are supposed to be at 128 so i began to lower the fp until it read 128-129. Then i shut the Ty off and checked the fp. It was at 42lbs. Is there anything wrong with this? How can a modified ty use less gas than a stock one? O i have 50# pte's too if this matters.
 

syntax

Member
nooooooooooooooooooooooooooooooooooooooooo brian, hehe
i know it ass backwards but for the s-terms in datamaster 177 is LEAN, anythign above 128 means its lean and anything under 128 means its rich, weird huh? so by lowering your fp you made the problem worse, if your s-terms are above 128 raise the fp until they are 128, good luck!
 

spooldup

Super Member
I don't get it because you can make it 128 but adjusting the fuel pressure. It doesn't bounce around at idle. The more pressure the higher the number went.
 
Top