Speed Pro and timing control....

Typhoonracer

Old Guard GURU
1. Does the brown wire with the black stripe comand spark as the stock computer does?
(I have Harrys SYTY wiring harrnes)

2. does ANYBODY have a schematic of the ECU (speedpro) and Harry's harness?

I am trouble shooting a timing issue with my ty....
 

smeagol

Active member
Use your stock manual to check continuity & such for the ignition (EST) wirs, all the way back to the stock ECM plugs, as those are used with PTE's plug n play harness. It just plugs into the stock harness and uses the correct pins for 'em.

So make sure your tan wire is connected etc, make sure that there is a pin in each of the corresponding slots.
 

Typhoonracer

Old Guard GURU
DUDE,
I have been running around for 3 + weeks at "0" BTDC.....
No wonder I could not build any boost....
And I TORE this truck apart......

NOW its tunning time!
All I did was replace the little black disconect...
Yes the tan one in the stock wiring harness...

Let me know when we can get out and tune...
 
Top