stock boost cut off

etriebe

New member
I have been driving my truck for the last few days:tup: and have noticed when I hit 4000 rpm it acts like I ran out of gas and quickly drops to 2000 rpm and then it drives normal. It does this everytime I get to 4000 rpm and 15 pounds of boost. I have no factory boost control but am using a stock chip with a 2 bar map. Does the stock chip cut fuel at 15 pounds or do I have something else going on?
 

2500avalanche

Well-known member
Re: stock boost cut off

I have been driving my truck for the last few days:tup: and have noticed when I hit 4000 rpm it acts like I ran out of gas and quickly drops to 2000 rpm and then it drives normal. It does this everytime I get to 4000 rpm and 15 pounds of boost. I have no factory boost control but am using a stock chip with a 2 bar map. Does the stock chip cut fuel at 15 pounds or do I have something else going on?

SOunds like ignition. What kinds of plugs are you running?
 

etriebe

New member
Re: stock boost cut off

I have a fresh engine (200 miles) with NGK Ur5 gapped at .030 an MSD coil and stock distributor.
 

cloneman315

Active member
Re: stock boost cut off

keep that up and you will be rebuilding it again!! do some reading the ecm is cutting the fuel.
 

etriebe

New member
Re: stock boost cut off

All the factory stuff is unplugged and gone. I have an external wastegate, manual boost controller. No electrical control at all
 

cloneman315

Active member
Re: stock boost cut off

you need to keep the bost under 15 with a 2 bar map,and keep the factory boost solenoid plugged in
 

etriebe

New member
Re: stock boost cut off

You are correct sir. I will stop driving it until I get A 3 bar chip installed. Thanks, I DO NOT want to build it again.
 
Top