Stock chip boost limiter

TurboJunk

questionable
With the stock chip and the factory boost controll solinoid and wastegate what makes the computer limit the boost? does it just read the boost level from the map sensor then limit it or does it do it from the solinoid?

i have a manuel boost controller and external waste gate the factory solinoid is disconnected and it goes it 16psi and stays there? is this normal or is something else wrong
 

TurboTony

Active member
Re: Stock chip boost limiter

In short, yes.

The ecm controls boost by changing the pulse width of the solenoid based on what it sees from the map sensor.

Your external is not ecm controlled, that is why it goes to 16 and stays.

Tony
 

TurboJunk

questionable
Re: Stock chip boost limiter

Thanks... ive been talking about this with Scotts4 and just wanted a second opinion... thank you
 

NecroWolf

lost marbles member
Re: Stock chip boost limiter

this is a little off topic, but... so if i wanna run an ultimate chip with the adjustable boost i have to have the factory setup in place. i bought my truck with a jury rigged manual boost controller. and no boost control soleniod. so will i have to buy a factory boost controler?
 
Top