Stock injectors specs?

sy#2716

SyTy 4 Life
What are the specs for stock injectors for syty's? Bascially what i want to know if can they be run in an LT1 as an upgrade? I just put a cam and did some valvetrain work on my brother's T/A and the stock injectors are at 118% duty cycle and it's cutting out up top. We got some stock syty injectors lying around and wondering if they'll work! TIA!
 

sy#2716

SyTy 4 Life
Well i knew that!

What do they flow at different fuel pressure?

IE. Stock LT1 fuel pressure is 43.5! What is stock st/ty FP? I know there is a formula somewhere, i'll try and find it!
 

dgoodhue

BuSTeD 4.3
GM injectors are usually rated at 3 bar or 43.5psi. I had my stock injectors cleaned they all flowed 30lbs/hr at 43.5psi.
 

sy#2716

SyTy 4 Life
Where did you have them cleaned and how much? I was thinking about doing it myself..how hard is it?
 

Loeryder

New member
RC Engineering also does them.

http://www.rceng.com/

Paul H. (techweasel) had his done their I believe and they gave him the grand tour of the shop and a VERY detailed flow demonstration.
He was mucho impressed if I recall correctly.
 
Top