stock replacement valvesprings

[BMFB]

Well, engine build is coming to a close, only thing left is a set of valve springs, Im nearly certain that a set of SB springs will work. Im keeping with the stock cam, and rockers, and was just wonder what i should look at for springs. I may one day go to a 1:6 rocker, but I'm not sure if such a spring capable of easily handling both situations exists.

 

[BMFB]

Re: stock replacement valvesprings

i guess what im really looking for is the stock spring wieght, and some advice on the possibilty of 1:6 rockers

 

[Quickstop [UK]]

Re: stock replacement valvesprings

I read on RPM that the spring constant is 110lbs or so....

What build is this going in to? Stock cam then I don't think 1.6s work/benefit you.

 

[BMFB]

Re: stock replacement valvesprings

http://www.summitracing.com/parts/SUM-174000/

would these work as a stock replacement?

 

[BMFB]

Re: stock replacement valvesprings

so I guess i shouldnt feel to bad about not knowing which would work best than, im suprised no ones said anything