For a stock engine bring the engine up to TDC #1 by watching the valves of NUMBER 4 cyl. Number 4 valves will be moving, number 1 won't. At this time adjust the following:
Exhaust valves cyl 1,5,6 Intake valves cyl 1,2,3
Turn the engine one full revolution and adjust the following:
Exhaust 2,3,4 Intake 4,5,6
The correct preload after -0- lash is one full turn. This centers the hyd lifter in its travel.
Personally I prefer a slightly different method but it requires two full turns so this is easier.