stumble on acceleration

etriebe

New member
Hello just got my new engine running and it stumbles on accel in neutral and while driving. It idles great and once you are steady cruising it runs great. I have ur5 plugs gapped at .035. What is the next step to check this thing out. Also it starts hard when its cold and dies and have to restart a few times, after that it also runs really rich. I know I need a copy of datamaster and a cable but one thing at a time.
 
Last edited:

QWERTYphoon

Motley Driver Award 2009
Re: stumble on acceleration

Spark plug gaps can be dependent on your build. For a stock build I found my truck runs best at .32 I inject meth so now I run close to .25 - .28 But I agree that .35 might be to big a gap. I would also check you PCV valves, and reset your IAC
 

etriebe

New member
Re: stumble on acceleration

Ok got around to checking some stuff out tonight and my fuel pressure was a bit low (38 psi) cranked it up to 45 and checked all my vacuum lines and everything looked good in that dept. Drove around the block and did a bit better but still there. Thanks for the starting point now tomorrow I will pull the plugs out and take a peek and close them up a bit.
 
Top