stupid question about changing oil

cvcsmkr

Donating Member
i did a search and couldn't find anything, maybe cause nobody has asked such a stupid question.
i dont know where the oil filler is?
i have a breather on the right valve cover.
i have only had the truck for a few months and i took it to my regular shop for the first change. and i want to change it from now on myself.
thanks
 

AlaskaTy

New member
It's on the driver's side cylinder bank in front of the breather valve (more towards the front bumper)
 

sy2206

New member
i did notice a bottle with a cap below the alternator. is that it?

No, it's behind the alternator. There's a plastic tube that extends out of the driver side valve cover about 4". On the top of that is a rubber cap that just presses in there. Just grab that rubber cap and pull it out. I'll try to find a pict.
 

sy2206

New member
Here you go! Keep in mind, if you have a breather, the breather might be in the "fill" hole instead of the stock tube/cap. In this case, just pull the breather out and fill it up.

oilcap.jpg
 

sy112

New member
just a little tip for ya, I assume by you needing to find the filler that you have/will changed the oil. When removing the remote filter, place a 1 liter or cut down 2 liter bottle under the filter to catch any excess oil from dripping and getting everywhere. keeps things nice and tidy.
 

InvisiBill

Active member
sy112 said:
just a little tip for ya, I assume by you needing to find the filler that you have/will changed the oil. When removing the remote filter, place a 1 liter or cut down 2 liter bottle under the filter to catch any excess oil from dripping and getting everywhere. keeps things nice and tidy.

This is one of the best tips ever. My S-10 is nasty up there. Luckily my Sy hasn't had to experience that.

Also, those rubber strap wrenches are very handy for removing the filter.
 

sy2206

New member
I always just stick some rags under the filter then twist ot off. If it drips a little, who cares, it just drips on the rag. Then just take the rag out and it's nice and clean! Either way, I agree with sy112, it looks much better when you can keep it clean up there!
 

MR_MNZTR_SY

New member
yeah the rag is so much easier than fumbling with some kind of catch thing. just gotta be careful it doesnt soak through the rag or anything. multiple rags are ideal....
 

cvcsmkr

Donating Member
thanks for all the tips.

yeah the breather went right inside the filller.(i thought that, just wanted to make sure)

everything went good other than, when i loosened the plug the oil missed the drain pan completely and went all over my driveway.

the 2 liter bottle thing was kind of hard to fit, (1liter would probably work better. i just took a small garbage bag and then unscrewed it.

how tight should the filter be(hand tight?)
 
Top