Syclone Dyno

JEFF SCOTT IS THE MAN!
I just got back from the Dyno. It was a AWD Dyno Dynamics at DB performance in Rodgers, MN. Jeff Scott has taught me everything I know about tuning. He is a great teacher and great guy. I still have more to learn. I had the tuner at DB work with me and he picked up really fast on tuning the truck. We put our heads together and we hit 374whp @ 455tq. Dynojet conversion = 438 whp and 538tq. Keep in mind a stock STI makes 190 whp on this dyno. They don't call it the heart breaker for nothing.
The tune on the street needs some polishing but I could not have gotten the logs and expertise I got at DB. The dyno was a great tool to get my tune close. It also helped me tune WOT in a safe environment. Jeff did give me a word of caution about only tuning on the dyno vs the street and there is a difference but again the dyno got me close. It seems a little richer on the street.
I ran Greenway 92 pump gas and it sucks. The truck would not stop knocking at 16 psi at 10 degrees of timing. Once we started using alky we got to 23 psi @ 12 degrees of timing, 0 KR. The strange thing is the truck didnt want more timing than 12deg but it wanted more boost. We were going to tune to 25 psi but my 8lb tial wastegate spring was stopping me. I think if we could have reached 25-26 psi I could have made a clean 400whp on that dyno.

I raced my friends 2006 Mustang GT with exhaust intake and tune on the way home from a 65mph roll and I pulled away from him like he had the car in reverse. The truck felt good. Huge top end over stock.

Mods: L35 heads ported, 412 cam, 60# injectors, 1.5 roller rocker arms, FMIC, Alkycontrol alcohol injection, 3" exhaust, SRP forged aluminum pistons, Eagle Hbeam rods, 4 bolt main conversion. TE06h-24v Mitsubishi heavy industries turbo, Tial 38mm wastegate.

The next stop is the 1/4 mile and more tuning. I have high hopes. My friend with an evo9 made 332whp on the same dyno and ran 11.7 in the 1/4 mile. I hope to hit that or better.

Thank you Jeff and thank you Shane from DB Performance.
dynopull.jpg

http://www.youtube.com/watch?v=bjJnI9PEWaM
 
Last edited:
Re: Syclone Dyno

Awesome! Well done!

What next then? How come your spring was limiting you?

The tuner told me that a 6 or 8lb spring would have a hard time staying shut at that boost level. In other words I think the wastegate was not staying shut and bleeding exhaust. It just would not go any further no matter what we tried. I was not a leaking boost because the boost control was very flat on the graph. I also performed a boost leak test.
 

Don W.

Stab it and steer it
Re: Syclone Dyno

Except for the turbo and WG that's my setup. I can run mid to upper 12's on low boost with no knock. With a stock IC outside temps are limiting. Waiting on a patched chip to log AFR's before I bring the boost up. Meantime I've got things fairly well nailed just based on the amount of retard being pulled which is nearly -0-. BTW just for S&G the way I killed the knock was to add just a couple of gallons of 100 at the track. Made all the difference. So I've got it figured out. Arrive at the track with just more than 1/2 tank, add the 2 gals of 100 and I'm good to go.

Oh ya, built trans, external cooler and 2800 stall.

I think you should go into the 11's fairly easy. At last check there is a 4 wheel dyno in town. I just have to bite the bullet and make an apt.

Have fun at the track. Unless you have slicks 4-5 lb may be the best launch you can get without spinning. Let us know. I, for one, am really curious.

Good job!
 

JSM

Active member
Re: Syclone Dyno

Its good to see a sucess story and happy owner.

But other owners should know, the reason this worked is the owner was willing to dive in and figure things out on his own. Sure we talked several times on the phone, I would guide him through tunerpro, the tables, etc. What is hard for me is the only cues I have over the phone is what is being told to me. I can't hear the engine, feel how its running, nothing. Imagine closing your eyes and trying to read and understand a post here on syty.

We had a few issues to resolve with a turbo problem, etc. and pulled up his sleeves and went to work looking.

My end goal was to teach someone how to tune, not necessarily send them a magic tune. In fact a magic tune really doesn't exist no matter what vehicle or system.

I think in total i sent him less than 10 bin files, but we talked about what I was doing and why several times. The hardest part about learning how to tune is getting started. Thats it. It gets easier the more you do it.

With that said my advice is purely that. How I do things and my opinions. I suggest everybody listen to other tuners and see how they do things. No 1 right answer here. I am no PHD at tuning myself. I bounce ideas and ask suggestions from others also. Its how we learn.

It is a huge pet peeve for me to see people spend years and tons of cash putting mods on a truck and expect an off the shelf tune to work. It just isn't going to happen. To be honest I read then ignore a lot of those posts. I feel if your too stubborn to expand your skills and tune on your own, I am too stubborn to help you.

When I see someone willing to learn then I am willing to teach what I know (takes 30 seconds or so).

Look at something in his dyno chart. Its listed as MPH so we don't know RPM exactly but look how flat the torque and HP are. This is what makes us go fast vs say a supra the might peak HP double that, but anywhere else barely has enough HP to keep the alternator spinning.

Alex's beast he built has very similar curve to it.

As you move to the track, pay particular attention to your 60ft times. So many people give up ET in the first 60ft. If any place can give you the best gains it will be 60ft. Any drop you get there will double or triple in ET.
 
Re: Syclone Dyno

Again, thanks for the help Jeff. I was hoping you would see this post. People on this forum need to be recognized for helping each other out. I will try and return the favor to someone else if I get the chance.
Oh, and the tuner was impressed by all the code59 support that has been developed for this truck.
 

JSM

Active member
Re: Syclone Dyno

It all comes down to an owner willing to learn and do new things, vs sit back and hope someone else gives them the solution. Good Job!
 

qbnkiller

Conflaguration Specialist
Re: Syclone Dyno

Its good to see a sucess story and happy owner.

But other owners should know, the reason this worked is the owner was willing to dive in and figure things out on his own. Sure we talked several times on the phone, I would guide him through tunerpro, the tables, etc. What is hard for me is the only cues I have over the phone is what is being told to me. I can't hear the engine, feel how its running, nothing. Imagine closing your eyes and trying to read and understand a post here on syty.

We had a few issues to resolve with a turbo problem, etc. and pulled up his sleeves and went to work looking.

My end goal was to teach someone how to tune, not necessarily send them a magic tune. In fact a magic tune really doesn't exist no matter what vehicle or system.

I think in total i sent him less than 10 bin files, but we talked about what I was doing and why several times. The hardest part about learning how to tune is getting started. Thats it. It gets easier the more you do it.

With that said my advice is purely that. How I do things and my opinions. I suggest everybody listen to other tuners and see how they do things. No 1 right answer here. I am no PHD at tuning myself. I bounce ideas and ask suggestions from others also. Its how we learn.

It is a huge pet peeve for me to see people spend years and tons of cash putting mods on a truck and expect an off the shelf tune to work. It just isn't going to happen. To be honest I read then ignore a lot of those posts. I feel if your too stubborn to expand your skills and tune on your own, I am too stubborn to help you.

When I see someone willing to learn then I am willing to teach what I know (takes 30 seconds or so).

Look at something in his dyno chart. Its listed as MPH so we don't know RPM exactly but look how flat the torque and HP are. This is what makes us go fast vs say a supra the might peak HP double that, but anywhere else barely has enough HP to keep the alternator spinning.

Alex's beast he built has very similar curve to it.

As you move to the track, pay particular attention to your 60ft times. So many people give up ET in the first 60ft. If any place can give you the best gains it will be 60ft. Any drop you get there will double or triple in ET.

Well said my friend!
 

BMFB

Not to scale
Re: Syclone Dyno

I know there are a few people on here that ask alot of questions, and at one time I was one of them (most where)

hopefully you guys don't look down on those looking for a little advice now and again from people who have already done what they are trying to do. I know i've picked qbn's ear before, and he helped me alot with my issue (trans selection)
 
Re: Syclone Dyno

Oh and one more question to all the tuners out there. Why is the truck knocking on 92 pump 16psi with 10 degrees of timing. And why does the truck only want 12 degrees of timing at WOT max? I set my timing to 0 with the pointer in the block (yes I know about disconnecting the gray wire) . Is it possible I have the base timing is too far advanced? How to I find out if the pointer on the block is wrong?
 

PPI Typhoon

DIY Madman
Re: Syclone Dyno

I'm just glad the tuning community has come to this. I remember 10 years ago the kind of flack you would get if you wanted to dig into things deeper and how ludicrous the pricing was.
 

JSM

Active member
Re: Syclone Dyno

I know there are a few people on here that ask alot of questions, and at one time I was one of them (most where)

hopefully you guys don't look down on those looking for a little advice now and again from people who have already done what they are trying to do. I know i've picked qbn's ear before, and he helped me alot with my issue (trans selection)

Not at all, I try hard to help people on here.

Its easy to tell from just a few words if someone wants something handed to them or has done some research and reading and needs a few things clarified.

A question like "i read something about tunerpro, what is it and where can I find it"

Tells me right away either google or the search bar is blocked from your computer by your mom, or you just want someone to hand you information. No effort on your part = no effort on mine.

"I downloaded tunerpro, went on code59 website and got the files but i am having trouble understanding the fuel tables" Hey, i can see you've don't some homework put in your own effort into this, I am willing to put some effort of my own into helping you.
 

WyoSyclone

Active member
Re: Syclone Dyno

Oh and one more question to all the tuners out there. Why is the truck knocking on 92 pump 16psi with 10 degrees of timing. And why does the truck only want 12 degrees of timing at WOT max? I set my timing to 0 with the pointer in the block (yes I know about disconnecting the gray wire) . Is it possible I have the base timing is too far advanced? How to I find out if the pointer on the block is wrong?

It could be the gas you're using. I've seen Dig mention more than a few times to try a different brand. I had it happen to me... was using my lifetime favorite, Shell, and couldn't get rid of the knock. Switched to Chevron and knock was reduced.

With your mods I would think you should easily get 16psi with about 14.8 or 15 degrees of advance with little or no knock.
Get a piston stop to find top dead center and see where your timing pointer is... balancer could be off a few degrees.
After that it's all about AFR's to minimize it, assuming you have good spark and the right plugs (I use UR6ix's gapped at .028).

Try all the things above, and if that doesn't reduce it, get two 32 ounce cans of the unleaded Torco Accelerator... that stuff is amazing - it's completely eliminated my KR. Two cans will give you 102 octane with a full tank.

Good job on your truck! Nice to see an owner really doing his homework and putting in the work. If you ever need me to look at logs just let me know and I can offer suggestions.

HTH
 
Re: Syclone Dyno

I take back what I just said. I took a better look at my tune 17 deg of timing is what Im running at peak boost. Sorry about that. How is that compared to other tunes? And yes I meant the tan wire for timing :)
 

BMFB

Not to scale
Re: Syclone Dyno

17 is getting out there, every truck is differant though.

What kinda compression are you running with those new pistons?
 
Top