SYTY exhaust manifold stud
- Thread starter Slyclone
- Start date
![Quickstop [UK]](/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: SYTY exhaust manifold stud
If sold separately, you might get one for $250. A set is $375-425
Have you tried taking it to a shop?.
If sold separately, you might get one for $250. A set is $375-425
Have you tried taking it to a shop?.
Slyclone
Well-known member
Re: SYTY exhaust manifold stud
I actually re-worked the part. Cnter punched, pilot it out with 1 1/6th bit and stepped it up from there. This whole episode is over. ( fixed the problem)
I was tossing around the idea of unloading some stuff I have and wanted a good base price or opinions.
I actually re-worked the part. Cnter punched, pilot it out with 1 1/6th bit and stepped it up from there. This whole episode is over. ( fixed the problem)
I was tossing around the idea of unloading some stuff I have and wanted a good base price or opinions.
Quickstop [UK]
Combating adversyty.
Re: SYTY exhaust manifold stud
Congratulations
Congratulations
turbo_tuna
New member
Re: SYTY exhaust manifold stud
How difficult is it to remove the manifold in the event the studs need to be replaced? It does not look like there much room to remove it while the engine is in place.
How difficult is it to remove the manifold in the event the studs need to be replaced? It does not look like there much room to remove it while the engine is in place.
Quickstop [UK]
Combating adversyty.
Re: SYTY exhaust manifold stud
It's relative. How many mods do you have? Prepare for some swearing. Is the AC in place? Stock turbo?
Remove the wheel well, down pipe and then the turbo and oil/coolant lines. It's couple of hours of work assuming all bolts are not seized. Might be easier removing the turbo after you get the manifold. Don't forget the crossover pipe etc.
It's relative. How many mods do you have? Prepare for some swearing. Is the AC in place? Stock turbo?
Remove the wheel well, down pipe and then the turbo and oil/coolant lines. It's couple of hours of work assuming all bolts are not seized. Might be easier removing the turbo after you get the manifold. Don't forget the crossover pipe etc.