T04E Measurement

Darin

Darin

New member
Anyone have a T04E turbo laying around? I'm looking for the measurement of the diameter of the bolt circle on the back of the compressor housing.

Let me try to explain this better:

Holding the compressor cover onto the center section there are 3 large tabs held on by 6 bolts.I'm after the measurement of 2 opposing holes, center to center. I can't seem to find this online on garrett's catalogue.

Thanks!
 
D

Damian

Member
Re: T04E Measurement

So you're looking for the diameter from bolt hole to its complete opposite bolt hole?

Out of curiosity, why?

I don't know the measurement, but all of the T4 series should be the same. The only difference is the backplate where the wheel sits and the housing being machined for the wheel. If you're looking for the 3 mounting tabs, they are the same for a E housing as they are on a B housing and so on.
 
Darin

Darin

New member
Re: T04E Measurement

It's for sourcing a bracket, or building it if possible. Nothing to do with a syty, actually, it's for a friends project.

But yes, the diameter between opposing bolts is what I am after. If you were to draw a circle through the center of the 6 holes, what is the diameter of the circle?
 
D

Damian

Member
Re: T04E Measurement

I don't have the T04E turbo at my house anymore, but Ill ask my friend as soon as I find out where my 1 year old son put my phone. Stand by.
 
D

Damian

Member
Re: T04E Measurement

My turbo buddy says there are two different styles, the one he has in his garage is 6.25".
 
You must log in or register to reply here.
Top