TDC check

Don W.

Stab it and steer it
One day soon I’m gonna do a "verify the timing mark TDC" check. So I’m looking around and to get to the crank it seems I gotta remove the IC radiator correct?
Then it would seem that I need a turning tool like Summit PRO-66782
http://tinyurl.com/af3fh
and, of course, a spark plug hole piston stop but I knew that.
icon_smile.gif


Any tricks I ned to know?

Thanks
 

mrweelr

New member
Re: TDC check

All you need is the piston stop. Just pull the plugs, insert piston stop into #1, connect a ratchet and allen socket to your alternator pulley, turn engine clockwise until it stops, mark balancer with silver paint pen (carefully and accurately), turn motor the other direction until hits piston stop again, mark balancer 2nd time; middle of the two marks is true TDC. Do this a few times and recheck the mark to be sure. I verified mine again last weekend and by some miracle the notch on the balancer is still precisely at TDC :) Good luck, any questions ask away.
 
Top