The Valve Cover Question.

[Aeroking]

I've searched, and read the old posts.

Some said, cut the ribs outta the covers, some same the rockers are too wide.

So i'll ask, and maybe get a solid answer.

I'm gonna be running L35 heads, Comp Pro Mag 1.6 Full roller (roller fulrom & tip) self-alinging rockers. and a cam with about .530-.540 lift.

Do i need to go to a set of custom valve covers. I have a set of the plastic vortecs, I also have a couple sets of the stock stamped steel ones.

What will fit?

 

[nallj92]

Re: The Valve Cover Question.

stock steels work fine for my full roller 1.6's

 

[sy445]

Re: The Valve Cover Question.

I have 1.6 pro mags on my vortecs. plastic covers wont fit period. I had to remove all the supports inside the stock steel covers to make them fit.

 

[dgoodhue]

Re: The Valve Cover Question.

I read the palstic vortec don't work with the stock IC brackets.

 

[Aeroking]

Re: The Valve Cover Question.

I read the palstic vortec don't work with the stock IC brackets.

mine clear