Theory

Don W.

Stab it and steer it
Looked at 2 (#1 and #5) plugs the other day just for the heck of it. To me they seem lean. Half way around white, “normal” brown the rest with a little splotch of black. Plugs are AC Delco CR42TS. Truck has stock FP, FPR, turbo, IC (except the pump’s full time).

The symptom: Fuel pressure rises more than 1 lb for each lb of boost. For example at idle I’ve got 40psi at 14 lbs (aprox) of boost I’ve got nearly 60 lbs.

The theory: What I’m wondering is if my injectors might be flowing incorrectly, as in lean. In other words if the injectors are flowing less than spec. then a.) I’m lean, and, b.) fuel pressure is high because the engine is using less than the correct amount of fuel under boost. Make any sense? Does my theory fly or is it pie-in-the-sky?

BTW I just got a set of 40 lb'ers. 3 years old but still new in the box. Because of the small difference in flow can they be used or do I have to reprogram the chip which I have coming.

Thanks,
 

leroy

Donating Member
Re: Theory

Don W. said:
Looked at 2 (#1 and #5) plugs the other day just for the heck of it. To me they seem lean. Half way around white, “normal” brown the rest with a little splotch of black. Plugs are AC Delco CR42TS. Truck has stock FP, FPR, turbo, IC (except the pump’s full time).

The symptom: Fuel pressure rises more than 1 lb for each lb of boost. For example at idle I’ve got 40psi at 14 lbs (aprox) of boost I’ve got nearly 60 lbs.

The theory: What I’m wondering is if my injectors might be flowing incorrectly, as in lean. In other words if the injectors are flowing less than spec. then a.) I’m lean, and, b.) fuel pressure is high because the engine is using less than the correct amount of fuel under boost. Make any sense? Does my theory fly or is it pie-in-the-sky?

BTW I just got a set of 40 lb'ers. 3 years old but still new in the box. Because of the small difference in flow can they be used or do I have to reprogram the chip which I have coming.

Thanks,

Idle is not 0 psi, since the intake is under vacuum. 60 psi is about right.

I know one experienced person that got a set of 40# injectors working decent. It takes quite a bit of chip work.

HTH,
Jim
 

crashing_sux

Blow Me?
Re: Theory

It should rise in step with your manifold pressure. If your manifold went from -5psi, to 15psi that's a 20psi gain, which makes your 20psi gain from 40-60psi exactly what you'd want.

Don W. said:
Looked at 2 (#1 and #5) plugs the other day just for the heck of it. To me they seem lean. Half way around white, “normal” brown the rest with a little splotch of black. Plugs are AC Delco CR42TS. Truck has stock FP, FPR, turbo, IC (except the pump’s full time).

The symptom: Fuel pressure rises more than 1 lb for each lb of boost. For example at idle I’ve got 40psi at 14 lbs (aprox) of boost I’ve got nearly 60 lbs.

The theory: What I’m wondering is if my injectors might be flowing incorrectly, as in lean. In other words if the injectors are flowing less than spec. then a.) I’m lean, and, b.) fuel pressure is high because the engine is using less than the correct amount of fuel under boost. Make any sense? Does my theory fly or is it pie-in-the-sky?

BTW I just got a set of 40 lb'ers. 3 years old but still new in the box. Because of the small difference in flow can they be used or do I have to reprogram the chip which I have coming.

Thanks,
 

Don W.

Stab it and steer it
Re: Theory

crashing_sux said:
It should rise in step with your manifold pressure. If your manifold went from -5psi, to 15psi that's a 20psi gain, which makes your 20psi gain from 40-60psi exactly what you'd want.

On the one hand someone told me that 60 psi fuel pres was to much. On the other what you say makes more sense.
Now if I could get some opinions on the Datamaster runs it would be cool. My learning curve is still steep here.
icon_rolleyes.gif
Although the truck seems to run really well it obviouly isn't making the HP because my ET's are running right at 14.

So anyway all thoughts apreciated. My piston stop just arived today so will be checking timing this weekend if not sooner. And the UC should be here in a day or so also.

Thanks
 

crashing_sux

Blow Me?
Re: Theory

It's my understanding that bosch did some testing on pintle style injectors (probably what you are using) and found them reliable up to 70psi, after which the flow started to become non-linear and increase more slowly (which could cause lean out). Let's see what others have to say but I know my truck hits 70psi at high boost and I have no problems at all.

It's a balancing act anyway, if you say I'm running 25lbs of boost max, and at idle I'm around -5psi, that's a 30psi range. If I set 70psi I'd have to have my idle psi around 40 (and be at 45 with the vacuum hose unhooked), which seems dead on again as going much lower results in poor fuel atomization (or so I hear) and crappy emissions and idle. Seeing what others run, I'd say those numbers are pretty realistic.
 

crashing_sux

Blow Me?
Re: Theory

I'm feeling the steep learning curve myself, the ecm/tuning part comes very naturally to me as I'm a programmer by trade, but I keep forgetting stupid little steps in the hands on stuff when I'm actually turning wrenches. Given enough time I'm sure we'll get there though.
 

Daryl H

Donating Member
Re: Theory

leroy said:
I know one experienced person that got a set of 40# injectors working decent. It takes quite a bit of chip work.

HTH,
Jim


I thought the stock chip could take up to 42 lb injectors and not have a problem.
 

JSM

Active member
Re: Theory

Daryl H said:
I thought the stock chip could take up to 42 lb injectors and not have a problem.

Not true at all.

Something I have seen in general the past few weeks is everybody is expecting some magical chip to cure all the issues.

It doesn't exist. For example: You could build the exact same motor as your neighbor "king of chip tuning". Mr. Neighbor has his truck dialed in perfectly, runs 9's on low boost, gets 30mpg, etc etc. Take his chip in your identical build list motor and it will still need work. If not you need to be buying lotto tickets not truck parts.

What I tell people when they call me asking for chips, etc is to learn/purchase the tools themselves. Learn how. Then if you need help from one of the more experienced tuners around you can talk the same language and work through the issues more quickly and more confidence.

It doesn't matter if you have a bone stock truck, to fully built every truck can use more tweaking/tuning to make it better. That won't come in the mail on a chunk of sand you plug into the ECM.

I see so many people, and I was at fault myself 4yrs ago, of wanting to always go faster, buying more and more parts to throw on the truck, watching it stay the same or go slower. Parts are so much easier to bolt on than learn that chip crap.

Phil is one that has shown people how far tuning can get you on a stock motor.

Before everybody figures out what is the next part they "NEED" to go faster ask yourself, have I tuned my truck to it's current capability? Then don't expect someone else to be able able to send you a chip from miles away and it to work for your truck, the tuner has never even sat in, heard run, etc.

[/end of Jeff's chip rant]
 

Turbo6

10.20@131.8
Re: Theory

JS Manufacturing said:
Not true at all.

Something I have seen in general the past few weeks is everybody is expecting some magical chip to cure all the issues.

It doesn't exist. For example: You could build the exact same motor as your neighbor "king of chip tuning". Mr. Neighbor has his truck dialed in perfectly, runs 9's on low boost, gets 30mpg, etc etc. Take his chip in your identical build list motor and it will still need work. If not you need to be buying lotto tickets not truck parts.

What I tell people when they call me asking for chips, etc is to learn/purchase the tools themselves. Learn how. Then if you need help from one of the more experienced tuners around you can talk the same language and work through the issues more quickly and more confidence.

It doesn't matter if you have a bone stock truck, to fully built every truck can use more tweaking/tuning to make it better. That won't come in the mail on a chunk of sand you plug into the ECM.

I see so many people, and I was at fault myself 4yrs ago, of wanting to always go faster, buying more and more parts to throw on the truck, watching it stay the same or go slower. Parts are so much easier to bolt on than learn that chip crap.

Phil is one that has shown people how far tuning can get you on a stock motor.

Before everybody figures out what is the next part they "NEED" to go faster ask yourself, have I tuned my truck to it's current capability? Then don't expect someone else to be able able to send you a chip from miles away and it to work for your truck, the tuner has never even sat in, heard run, etc.

[/end of Jeff's chip rant]

True dat
 

Don W.

Stab it and steer it
Re: Theory

Hey, rants are OK. I’ve posted a couple myself.
Ok.gif


If I stand back and look at the big picture AFA the Sy is concerned I see a couple of things. One is, I know I’m a pretty good wrench bender but not real good at electronically controlled engines. Two, I’ve yet to find someone in my area that I’d be willing to turn my truck over to. Sooo I hang out here learning what I can and tinkering with my truck. Tinker, tune, learn, post, race, learn,…..


Eventually I’d like to consistently be in the 13’s and at 100. As we all know consistancy is the key (to bracket racing) and only practice can fix that.

Now if someone could look back a couple of posts in this thread and take a peek at my Datamaster posts it'd be cool.

Thanks,
 

mrweelr

New member
Re: Theory

Don -

This is Jeremy, I believe we met at Tom's party last weekend. I looked over all three of your DM files and I don't see anything to be concerned with. Try launching with more boost to hit 13's, stock truck should be able to do that ;)
 

Jimmy

Banned
Re: Theory

Your boost is all over the place,and it is running lean. The stock chip has a boost flag in 1st gear that you need to beat before you launch it.

KR is minimal,probably related to being lean.
 

Don W.

Stab it and steer it
Re: Theory

Jimmy said:
Your boost is all over the place,and it is running lean. The stock chip has a boost flag in 1st gear that you need to beat before you launch it.

OK fine.
icon_smile.gif
How do I fix
squint.gif
 

Jimmy

Banned
Re: Theory

Find the boost leak,up the FP,romp on it real quick (i.e accelerate briskly for a sec) to override the flag.

All in all it looks totally safe,but not optimal.
 

mrweelr

New member
Re: Theory

Target and actual boost values are within ~1 psi, O2 Mv are in the low 900's, S-Term values aren't green at WOT, not setting any codes, what makes you think he's running lean? The stock wastegate has poor boost control, that would explain the spikes. Injector duty cycle is way up there, but mine were about the same when I was running stock. Please elaborate, thanks.
 

Jimmy

Banned
Re: Theory

mrweelr said:
Target and actual boost values are within ~1 psi, O2 Mv are in the low 900's, S-Term values aren't green at WOT, not setting any codes, what makes you think he's running lean? The stock wastegate has poor boost control, that would explain the spikes. Injector duty cycle is way up there, but mine were about the same when I was running stock. Please elaborate, thanks.
LOL I didn't realize that the stock WG was such a POS.I'm used to my straight as an arrow line on the graph.

IMO it is a bit lean,nothing really to worry about,but mine seems to like 930 ish,and I did see Don's dip into the 880's.
 
Top