Throttle Body Heater Hose?

SacDoug

Member
I just got back from an emissions test. My truck failed badly but I think I can address all of the problems except one: the smog tech wrote down that the throttle body heating hose is disconnected. They could not find any diagrams for a Syclone so they went off of a S10 diagram. That shows heating hoses going to the throttle body. I explained that a turbocharged vehicle has a big turbo that heats up the intake but they would not buy it.

I have looked at other SyTy's in the past and as far as I know, the coolant lines to the throttle body are never connected. Does anyone know where I can find a repair manual page or other authority that I can print out and show to the smog tech to get my truck to pass smog?

Or should I just hook the thing up to my heater core since the smog tech couldn't tell me where the hoses are supposed to be connected?
 

NJ93TY

Donating Member
Re: Throttle Body Heater Hose?

Our trucks do not use a TB warmer, there are not supposted to be hoses going to the TB.
 

SacDoug

Member
Re: Throttle Body Heater Hose?

Thank you for the replies. I am going to buy the Chilton manual. I'm calling around right now to see if anyone has it in stock.
 

aasltmike

Active member
Re: Throttle Body Heater Hose?

Thank you for the replies. I am going to buy the Chilton manual. I'm calling around right now to see if anyone has it in stock.

If it would help, I got online access to it. I can download the pic for it and post it on the thread. Not sure if they would buy that...
 

kentuc

Member
Re: Throttle Body Heater Hose?

Those idiots didn`t believe My Ty had AWD. They had to find out for themselves(LOL).
 

SacDoug

Member
Re: Throttle Body Heater Hose?

Call this guy. Tell him you have a unique, low-production factory vehichle. That you know the TB is not heated. What does he suggest for evidence to convince the tech that he is wrong.

1-916-255-4300
Dan Varnette
Sacramento home office. This guy is GOOD when it comes to knowing about the smog=test program.

Thank you!

I'll give him a call on Monday.


I bought the Chilton manual and it is not as clear cut as I seemed to have remembered. The diagram is not very detailed for the installation and removal of the throttle body. It does list all the steps and removing and hooking up coolant hoses are clearly not included. I looked elsewhere for a photo or other diagram in the manual but it does not have any more.

I remembered that I have the Chilton manual on CD from a few years back. Unfortunately it requied an install that was not Vista or Win 7 compatable. I dual booted into XP to install the manual but found that it was exactly the same as the one I just bought.

I checked Autozone for a Haines manual but the manuals they have do not cover SyTys, only the regular S10s and Blazers.

When I first brought my truck to California, a smog tech would not pass me then because the smog sticker was worn away on the truck. He suggested I see a ref and get a special smog sticker. I ended up ordering a smog sticker from a GM dealership. When it came, it was just a regular S10 smog sticker but since it had the ignition timing on it, I put it on the truck. I'm starter to wonder if I should just see a smog ref rather than going through all this aggrivation every 2 years.
 

SacDoug

Member
Re: Throttle Body Heater Hose?

If it would help, I got online access to it. I can download the pic for it and post it on the thread. Not sure if they would buy that...

If it is from the older Chilton Manual that has a good picture of the throttle, then I'll take it. I don't think I can go wrong with too much supporting documents.
 

Daman

Member
Re: Throttle Body Heater Hose?

You should get a copy of the Sy/Ty CD ROM. It has a pdf copy of the GM service manuals for the Sy/Ty, as well as parts manual and service bulletins. For every Sy/Ty owner who plans on keep their truck running, this is a must have. If you search you should be able to find a link to a site that sells them, if they' re still available.
 

It's just a six

Super Member
Re: Throttle Body Heater Hose?

Nothing hooks up to the TB as far as water, but I always wanted to run the intercooler water through it, after I can convince my friend to install his icee chiller. That will pump cold A/C chilled water.
 
You should get a copy of the Sy/Ty CD ROM. It has a pdf copy of the GM service manuals for the Sy/Ty, as well as parts manual and service bulletins. For every Sy/Ty owner who plans on keep their truck running, this is a must have. If you search you should be able to find a link to a site that sells them, if they' re still available.


Good idea. I think they're still on sale for dirt cheap right now.
 

SacDoug

Member
Re: Throttle Body Heater Hose?

This just came in the mail today:

04231658.jpg


I have not heard back from BAR yet. I'll try again next week.

I think that it is rediculous that I have to go through all of these gyration to get my truck past the stupid smog laws. CARB even made a new rule this year that 3/8" hoses must be "fuel grade". I had a urethane hose that didn't have fuel grade stamped on it so they wrote down that my truck had an "engine modification". I romoved the offending hose and bought a $1 "fuel grade" rubber hose instead.

edit: resized image to 50% size.
 

SY2455

70's Veteran
Re: Throttle Body Heater Hose?

You really need to go to a new place to smog your truck. If you live closer to me I would take you and your truck to the place that I use since I bought it. The smog tech that you are using is not fit to be a doorknob.
 

SacDoug

Member
Re: Throttle Body Heater Hose?

Call this guy. Tell him you have a unique, low-production factory vehichle. That you know the TB is not heated. What does he suggest for evidence to convince the tech that he is wrong.

1-916-255-4300
Dan Varnette
Sacramento home office. This guy is GOOD when it comes to knowing about the smog=test program.


I finally got a hold of Dan today. I have to email him scans from the factory repair manual showing that the coolant lines are not connected on the throttle body.

He kept going on and on about how the truck probably has the wrong throttle body on it and how in his years of experience, the factory never leaves anything unhooked.

I do not feel very confident about this. The best that I have is the factory assembly instructions that show no step to hook up coolant lines. In other words I am proving a negative.

Also, he mentioned that I should contact GM and get an official communication from them stating that there are no coolant lines hooked up to the throttle body. I won't hold my breath that someone from GM would know about coolant lines on a specialty vehicle from 20 yeras ago, let alone have the time to send me a reply on GM letterhead.

He did mention that the factory would have capped off the coolant connections. My question is there supposed to be caps on those coolant connections? If so, where can I buy them?
 

BoostedSUV

Active member
Re: Throttle Body Heater Hose?

Dave mentioned it already that factory TB's coolant lines are capped on the inside. They will not flow threw even if the lines were connected. I have a TB off my truck and I can check that to verify but I know Dave knows his stuff...

With that said, even with proving that point you're truck still won't pass the smog test if I'm understanding correctly.
 

SacDoug

Member
Re: Throttle Body Heater Hose?

Dave mentioned it already that factory TB's coolant lines are capped on the inside. They will not flow threw even if the lines were connected. I have a TB off my truck and I can check that to verify but I know Dave knows his stuff...

With that said, even with proving that point you're truck still won't pass the smog test if I'm understanding correctly.


I looked at my coolant connections with a mirror and they were drilled and no cap internal or otherwise.

I can fix all of the other reasons it failed emissions. One of the cylinders is missing which caused my HC to be high and is making a slight eratic idle. I will just isolate which cylinder is missing, replace the wire to it and clean the spark plug.

After idling at 1500 rpms for 2 minutes and 2500 rpms for another 2 minutes, the engine was burning oil. It never burned oil before. I'll bet if it was on a AWD rollers that it would not burn oil. I will replace both PCV valves. I changed the oil to 50 weight and repeated the long idling in my driveway and no oil burning. I suspect my valve stem seals are probably on their last leg.

That just leaves the coolant lines to the throttle body left. If I can't get BAR to sign off on no coolant lines then I'll have to do something dumb like run a coolant line through the throttle body before going to the turbo. If I do that, then any SyTy owner that goes through after me will be f(&#@^ because the BAR will consider that as standard from then on.
 

BoostedSUV

Active member
Re: Throttle Body Heater Hose?

I looked at my coolant connections with a mirror and they were drilled and no cap internal or otherwise.

You are correct, I just went out and looked at my stock TB and I could blow right through the "coolant connections". They were definitely never connected but they aren't capped off.
 

gkrcr882

SyTyless......for now!
Re: Throttle Body Heater Hose?

I looked at my coolant connections with a mirror and they were drilled and no cap internal or otherwise.

I can fix all of the other reasons it failed emissions. One of the cylinders is missing which caused my HC to be high and is making a slight eratic idle. I will just isolate which cylinder is missing, replace the wire to it and clean the spark plug.

After idling at 1500 rpms for 2 minutes and 2500 rpms for another 2 minutes, the engine was burning oil. It never burned oil before. I'll bet if it was on a AWD rollers that it would not burn oil. I will replace both PCV valves. I changed the oil to 50 weight and repeated the long idling in my driveway and no oil burning. I suspect my valve stem seals are probably on their last leg.


Misfire will raise your HC and your CO levels

How did you verify the engine was burning oil? Was there visible blue smoke while it was running? After 2 minutes at 2500 and 2 minutes at 1500 the cat should be heated up enough to be functioning. Regardless, when the engine is under load (some boost) some oil will be burned as the PCV routes into the turbo inlet. Did you drive the truck until it was up to operating temperature before taking it in to test?

Coolant passage issue won't affect emissions, if the guy knew anything at all he would know the TB is heated to prevent icing in cool damp weather (and therefore sticking throttle blades), hence the reason why it's not needed on these trucks.
 
Top