timing question

QUICK STORM

B.A.M.F. BMW Tech
Re: timing question

Don W. said:
I'm almost afraid to start my own "it won't idle" thread.:rotf: No hijack, if it gets worse I'll wait awhile and then post.:D

ah, come on. mine won't idle either
 

Aeroking

e.i.
Re: timing question

bringin back this thread from the dead.

i have the exact same problem.

i started elimintaing variables
-removed my chip
-checked plugs and wires
-no vacuum leaks
-reset IAC
-reset ECM
-correct fuel pressure


i see the 2 timing marks on my balancer, my truck idles the smoothest when my 0 degree mark is right in between the 2 balancer marks.

i guess i have to go buy that TDC tool, and see if i cant fix this before summer comes.

i doubt if i'm 180 out, cause it idles smoothly (without the tan wire connected), and it fires up on the first starter crank.
 

Aeroking

e.i.
Re: timing question

Problem fixed, i found TDC and made a balancer mark.

Kept throwing the Code 42, so i replaced the ignition module. :tup:

runs like a champ.
 
Top