TPS to buy ?

Lynn D. Brown

New member
Hey Guys,

I just checked for a TPS for my Ty and NAPA wants $52. for it. All I really need it for is the screws, so I didn't want to pay much. Pep Boys has 2 different ones for the Z engine, both in the $25.-27 range. They have 2 different numbers and I don't know which one to get.

Anyone know why there would be 2 diff #'s ? Not sure I can find the screws separately. Don't ask me why I can't use the old screws - it's a long story.
 

sytyguy

Moderated User
A lot of these retail computers look up standard S-Series equipment for our trucks. As a result of this, the TPS often falls victim and is looked up for a TBI 4.3. The TPS we use is Standard #TH-69, so if you can get them to cross that number, you'll get the right one. If it looks somewhat like a snail shell, then it's wrong.

However, you should be able to find the bolts separate. Just get one of these retail stores to open the TPS box, take one out and try to match up a bolt there.

Not sure what thread it is, but it looks like a machine screw or a metric thread.

HTHs

Hood
 

Lynn D. Brown

New member
Thanx, Michael,

I don't kow why there is so much confusion for such a simple-minded part. Pep Boys gives 2 numbers : 1711-2679 and -2714, while the GM box I have says -2368.

It's just a simple damned 0-5 VDC variable rheostat, and it looks exactly like the one on the GN/TTA cars. I'll look for the machine bolts, but if the thing is metric....., or if the length is weird.....
 

InvisiBill

Active member
The TPS is hooked to the throttle body, which is from the L98 motor. Shouldn't it be one of the F-body/Vette parts? Or is it still an S-truck part, just mated to the L98 throttle body?
 

Lynn D. Brown

New member
No Bill, the LT-1 TPS is totally different. It mounts different, has a different electrical connection, and actuates differently mechanically.

I got the wrong TB from Conleys' and was trying to use it for my Ty. I had converted over to an LT-1 TPS and even bought an electrical adapter from Caspers'. For some reason, they make an adapter. Then I had to cut the old screws shorter. After all of this, I find out that the linkage is different and U can't get the SyTY linkage from GM. So, after ~ at least a year, I had to turn this TB back in and get the SyTy specific one. Just one more total PITA.
 

Lynn D. Brown

New member
Now it's really getting ridiculous. I went to my local Ace Hardware which has just about every bolt. Checking the small SS bolts, we find out that a 5mm Fine nut fits my old too-short TPS bolts - so I think I'm home free. Then I try the 5mm bolt on the TB and it won't thread in. Then I hold up the bolts to the light and compare the threads, and they are just a slight bit different.

Back to the store and I find that a #10-32 bolt is almost the same as the 5mm-70 thread. But it won't screw in either. So about all I can conclude is that this GD bolt is some special one-only bolt, so I guess I'll have to get another TPS to get the bolts. Why the F would GM do this ?
 

Sy769

Donating Member
Somehow I really really doubt GM did a special one off bolt thread to hold on the TPS.
Now some fasteners are difficult to find I admit but usually it is due to the type of head,attached washer etc. Odds are that is a standard thread.
ideas
1) Bolt bins get mixed up. Retards get bolts out and drop them into other bins. You may not have picked up what you think.
2) You may have some damage in either the threads in the TB or the bolt you picked up.
3) It would be a bit overkill to buy a TPS for the bolts don't you think?

I'll go out in the garage and check out the TB I have on the shelf. Will post back what I find later.
 

Lynn D. Brown

New member
Yeh, I know what Ur saying, Patrick, and I tried a few bolts from the bin, and the threads are so close that at 1st I thought I had it. And of course the threads could be screwed up on on this new BBK TB direct from their factory.

But the old screws - from another TB and another TPS - screw right into this new TB. I don't know what else I can conclude. I really appreciate any further input, Patrick. If we truly have something weird were, I guess it would be great for all of us to know.

I agree, it seems ridiculous that GM would make special screws for this part.
 

Lynn D. Brown

New member
TPS

TPS

Just found out another thing - according to Pep Boys, Napa, O'Reillys' and Autozone, our TPS is a special one. If U just call and ask for a TPS for a '93 Jimmy S-15 w the 4.3 Turbo "Z" engine, they quote U 2 choices in the $26-29 range.

Well I happen to have one from GM w the GM #. When U tell them that, then they say - "Oh, that one costs $45.-52". Well AH, I gave U the specs and why didn't U know that ? I guess if I didn't have the GM #, I would have gotten the wrong one ! As usual they don't know squat about our cars.

I wonder if it's really different, or we're just getting ripped off ?
 

sytydvr

New member
hey Lynn i replaced my tps a few months ago and im hoping i still have the extra set of screws if thats all you need I'll mail them out to you. let me know or if you r in the south bay we can meet up somewhere either way.


gotta go look 4 them though :D
 

Lynn D. Brown

New member
Hey Joe, I appreciate that. If you find the screws, just EM me @ L1D2B@aol.com. I'll give you my address and you can give me your SoCal tele # and maybe we can get together sometime when I'm there in Organge Co., which is only about a few days a month.
 

Lynn D. Brown

New member
TPS bolts.

TPS bolts.

Well, guys. I guess I have confirmed it. I got some new TPS specific screws for the BBK TB that I have, and they fit. Meanwhile the 5mm bolts that I tried wouldn't fit, so unless this particular Ace Hardware that I went to has all bad 5 mm bolts, these bolts must be a special item. GM sells them separately and they come new when U buy an AC Delco TPS.

So, for some unknown reason, it looks to me like they made the TPS w special "one-off" bolts. Makes no damned sense, I know !
 
Top