TTS Datamaster& cable

bezerk

New member
hello.

i already have experience with DM, but i got 2 OEM TTS cables laying around, and with that cable, i can't get in touch with the ECM.

hooked the TTS cable to the ADL port, and the plug that goes from a lt1port to a serieel cable into the port of my laptop.. and i just get an error in DM..no checkengine light or whatsoever.
already installed a PPI Typhoon cable to my truck (which does work), but i would like to use the OEM cable, so i can read out other trucks as well.
did somebody experienced this, and what shoul i do? or is the problem that the PPI Typhoon style cable is interfering with the OEM TTS cable?


Thank you verry much
 

PPI Typhoon

DIY Madman
Re: TTS Datamaster& cable

I see how it is.......mine's just not good enough.....:eyes:

And there is nothing that should interfere with it. It's not even powered if the serial cable isn't connected. It's not a short or anything, but rather a high impedance connection, so I can't imagine it being any problem.
 

bezerk

New member
Re: TTS Datamaster& cable

PPI Typhoon said:
I see how it is.......mine's just not good enough.....:eyes:

And there is nothing that should interfere with it. It's not even powered if the serial cable isn't connected. It's not a short or anything, but rather a high impedance connection, so I can't imagine it being any problem.

yours is good, i just want to go to check out a Syclone which i bought, and i kinda made your cable a thing that belongs to the truck, not easy to take out..
 

PPI Typhoon

DIY Madman
Re: TTS Datamaster& cable

bezerk said:
yours is good, i just want to go to check out a Syclone which i bought, and i kinda made your cable a thing that belongs to the truck, not easy to take out..

Yeah, I tried finding a source for the ALDL adapter, but it's not a cheap piece. But I'm working on making my own ALDL plug so you can use it as a "mobile" adapter. That's still a ways out though.
 

TYTILIDIE

METH HEAD
Re: TTS Datamaster& cable

Ive contemplated making an ALDL adapter as well. The problem with homemade cables is only that its becomes for your truck. I made my own that DAN was very generous in assisting me with and I love it. Just sucks when you want to play with soemone elses truck. The way I have mine set up is I made a template for the DB9 connector and cut itout on the lower dash. I then took some long screws and nuts and clamped her down to the lower dash. Then I did a 3-way to the wiring. So basically, I dont even need my ALDL, the DB9 connection takes its place. Maybe something to think about Dan, selling a template for that. I took off the lower panel as it was the easiest and a decently convenient location.
 
Top